Quick Details

• Place of Origin: China (Mainland)
• Brand Name: FTM
• Model Number: FTM series
• Name: Coal Briquetting Machine
• Production Capacity: 2-28 t/h
• Motor power: 5.5-130 kw
• Materials: charcoal,coal slime,etc.
• Certification: BV, CE, GOST, ISO9001
• Warrenty: 1 Year
• Maintenance: Convenient
• Abrasive Resistance: Good
• Installation: Under technical guidance

Coal briquetting machine can be used to suppress the pulverized coal, iron, coal, aluminum, iron, iron oxide, carbon powder, charcoal powder, slag, gypsum, tailings, sewage sludge, kaolin, activated carbon, coke powder and other powder, powder, waste, waste residue, widely used in power plants, metallurgy, refractory, chemical, energy, transportation, heating and other industries, after molding by ball press machine, the material features energy saving and environmental protection, convenient transportation, improve the utilization rate of waste, have good economic benefit and social benefit. The cold briquetting technology can be divided to binder molding and non-binder molding with the former one as the leading technology.

Maintenance and Treatment of Full Automatic Coal Dust Briquette Machine/How To Make Coal Briquettes

1. each pre-production inspection, the main view of Full Automatic Coal Dust Briquette Machine/How To Make Coal Briquettes to install the screw is loose, fuel, motor current, bearing fever, V-belt walking tank pressure. If temperature changes, oil spills and other causes of pressure changes should be injected into the new oil or run back to the correct hydraulic period to designate the working pressure change operation such as the hydraulic system oil spills should be immediately shut down and then start to repair oil spill . Effective routine maintenance and inspection can extend the useful life of equipment, be able to maximize the reduction of parking and cut-off, can effectively guarantee the continuity of the equipment.

2. the machine periodically check all aspects of Full Automatic Coal Dust Briquette Machine/How To Make Coal Briquettes maintenance, clean up the internal and check the bearings, spiral, triangle lining, materials mouth and other parts wear, the part is damaged should be replaced in a timely manner ensure that the equipment can be normal and stable in production.

3. Equipment lubrication, gearbox, reducer, bearings, gear oil for open gear box to invade the gear for more than 60 mm; reducer and gear oil, raise the amount of 60 mm can be invasive gear; roller bearings open once every three months, bearing to replace butter or grease gun oil.

Henan Fote Heavy Machinery Co., Ltd.insists on policy of responsibility for every process, responsibility for every machine, responsibility for every customer. we ensure to provide excellent machinery to our customers with more advanced, perfect technology and strict test. we have been developing and keep updating our products according to the demand of markets. All in all, we are sincerely hope that we can create brilliant future together. Welcome to visit and order.

Technical Data of Full Automatic Coal Dust Briquette Machine/How To Make Coal Briquettes

Performance		FTM-360	FTM-400	FTM-500	FTM-650
Output	hour (t/h)	4	8	11	18
	Annual output (million t/y)	1	2	3	5
Roller breadth (mm)		250	280	300	336
Roller diameter (mm)		360	400	500	650
Power(kw)		7.5	11-15	18.5-22	20-30
Speed of mainshaft (r/min)		18	15	13	13
Reducer		ZQ350	ZQ400	ZQ500	ZQ650
		ZQ400	ZQ500	ZQ650	ZQ750
Pressure form		Oblique iron constant pressure	Oblique iron constant pressure	Oblique iron constant pressure	Oblique iron constant pressure
		Axle bed pull rod	Axle bed pull rod	Hydraulic type	Hydraulic type
				Interchangeable of hydraulic and constant pressure	Interchangeable of hydraulic and constant pressure
Roller texture		65Mn	65Mn	65Mn	65Mn
				9cr2Mn	9cr2Mn
		Alloy steel	Alloy steel	Alloy steel	Alloy steel
Structural style		Double-roller&single pressure type	Double-roller&single pressure type	Double-roller&single pressure type	Double-roller&single pressure type
		Four-roller&dual pressure type	Four-roller&dual pressure type	Four-roller&dual pressure type	Four-roller&dual pressure type
Mainshaft bearing		319×4	319×4	2097724×4	2097724×4
Principal axis		φ95mm	φ110mm	φ135mm	φ165mm
		45# steel	45# steel	Forge piece	Forge piece
Spherical size		User defined	User defined	User defined	User defined

Performance		FTM-750	FTM-850	FTM-1250	Instruction
Output	hour (t/h)	25	35	70
	Annual output (million t/y)	7	10	20
Roller breadth (mm)		400	500	650	(65Mn)
Roller diameter (mm)		750	850	1250
Power(kw)		45	75	130	According to the materials
Speed of mainshaft (r/min)		13	10	10
Reducer		ZQ750	ZQ850	ZQ1250	Standard configuration
					Reinforced configuration
Pressure form		Oblique iron constant pressure	Oblique iron constant pressure	Oblique iron constant pressure	Optional
		Hydraulic type	Hydraulic type	Hydraulic type
		Interchangeable of hydraulic and constant pressure	Interchangeable of hydraulic and constant pressure	Interchangeable of hydraulic and constant pressure
Roller texture		65Mn	65Mn	65Mn	Casting	Either type
		9cr2Mn	9cr2Mn	9cr2Mn	Forging
		Alloy steel	Alloy steel	Alloy steel	Pressure casting
Structural style		Double-roller&single pressure type	Double-roller&single pressure type	Double-roller&single pressure type	Either type
		Four-roller&dual pressure type	Four-roller&dual pressure type	Four-roller&dual pressure type
Mainshaft bearing		2097724×4	2097724×4	2097724×4
Principal axis		φ165mm	φ180mm	φ225mm
		Forge piece	Forge piece	Forge piece	Hardening and tempering
Spherical size		User defined	User defined	User defined	Generally choose 30-60mm