Filter fabrics for horizontal vacuum filters are used for filtration of very fine inorganic suspensions, especially in the mining industry, and for gypsum filtration in flue gas desulphurization (FGD) plants.

 

To increase the ability of the belt to filter very small particles, some filters fabrics are made of the combination of PET monofilament and multifilament yarns (multifilament yarns filling apertures in the monofilament). One of the disadvantages of using multifilament yarns is a quick decrease in the air permeability of the fabric during operation, because blinding occurs faster than usual and consequently the fabric service life is shorter. In the past, we used different types of single or double layer monofilament fabrics with small apertures, capable of filtering very small particles without blinding. If the monofilament fabric is to have a large amount of small apertures, small-diameter monofilament yarn has to be used. On the other hand, the bending resistance of the monofilament fabric is lower than that of the multifilament fabric. If the monofilament fabric is installed on a large filter belt, the risk of rippling and damage to the fabric will be higher.

 

Nowadays, we offer a new generation of filter fabrics made of monofilament yarns. Thanks to their unique construction, they have great filtration and mechanical properties (including high bending resistance), which makes them suitable for wide belt filters with high demands on mechanical properties of the fabric.

 

Filter fabrics for vacuum belt filters contain the common clipper seam or the clipper seam with 
a textile overlap. Textile overlap prevents the cake from leaking into the filtrate and eliminates vacuum losses.

 

Basic Fabric Designs

Tex (150–350 CFM)

Tex is a filter fabric used for filtration of mining sludge in horizontal vacuum filters.

Examples of Application:

Filtration of coal dust in coal mines

Filtration of ground rock in copper mines

Filtration of phosphate rock

Production of phosphoric acid

Filter Fabrics for Filtration of Gypsum

 

FGD-Tex (10-30 CFM)

FGD-Tex is used in horizontal vacuum filters for filtration of fine gypsum particles in FGD plants.

Examples of Application:

Filtration of gypsum in FGD plants

Filtration of coal ash in coal fired power stations

 

FGD-Mas (55 – 80 CFM)

FGD-Mas is a new generation double layer filter fabric designed for filtration of gypsum in FGD plants.

Excellent filtration and mechanical properties of the filter fabric are due to the unique fabric construction. PET small-diameter monofilament yarns are used on the cake side to create a large number of very small apertures, while there are PET monofilaments with big diameters on the lower side to achieve high bending and mechanical resistance.

 

Main advantages of the FGD-Mas filter fabric:

Excellent filtration properties and weave stability

High air permeability throughout the fabric service life

High bending resistance in the cross-machine direction prevents the fabric from rippling

Fabric service life is extended by 20–50% (in comparison with standard fabrics)

 

Specification
Style	15T-50	Material	PET
Yarn Diameters (mm)	warp	Surface layer0.20/PET     Inlay0.30/PET
	weft	Surface layer0.20/PET     Inlay0.45/PET
Air Permeability  L/㎡.s(at 125Pa)	L/m2.S	270～320
	CFM	53～63
Air Permeability  L/㎡.s(at 200Pa)	L/m2.S	380～430
	CFM	75～85
Water Permeability(at 1200Pa)	L/m2.s	25.8～30.1
Thickness	mm	1.08
Breaking Tensile	N/cm	1500
Elongation (warp direction)	%	35.3
Elongation %	500kg/m	0.57
Weight	g/m2	780
Interception Accuracy	μm	50～60
Mesh		250～300
Maximum Safe opertaion temperture & Shinkage	Maximum Safe opertaion temperature(℃)	130
	Shinkage in warp direction(%)	0.80
Application	Suitable for horizontal vacuum belt filter.Mainly used for citric acid, power plant desulfurization, tailings disposal, etc.