High Manganese Steel Jaw Crusher/Best Jaw Stone Crusher

Jaw crusher is the most widely used type of stone crusher in mining machinery industry. Jaw crusher is an old-fashioned crusher, and also is the earliest type of stone crusher. Although it has been so long, still widely used in mining, building materials, road, railway, chemical industry, etc. Jaw crusher can divided into two basic forms: Jane put jaw crusher and compound pendulum jaw crusher. That's divided according to the movement track of move jaw. But as industry technology development and requirements, compound pendulum jaw crusher has toward large-scale development, and has the trend to gradually replace the jane put jaw crusher.

Installation Requirement of High Manganese Steel Jaw Crusher/Best Jaw Stone Crusher:

1. Rolling equipment assembly shall comply with the technical documentation.

2. Joints should be designed to locate and install a predetermined position on all the locating pin;

3. High Manganese Steel Jaw Crusher/Best Jaw Stone Crusher stand above components should base alignment, leveling and tighten the bolt, the parties have to be assembled;

4. Clearance each length should not exceed 100mm, the cumulative length should not exceed 10% of the total length of the edge joints;

5. Frame body connection bolt preload equipment shall meet the requirements of technical documents, the order should be tightened symmetrical, force should be uniform;

6. The base level should not be greater than 0.50/1000 longitudinally mounted, transverse installation level should not be greater than 0.20/1000, and bearing carved surface measurements on the spindle;

7. When using T-head bolt, it shall comply with design specifications, installation should be the existing state ' machinery and equipment for construction and acceptance of universal norms ' requirement standards;

8. Bracket and elbow pads should be approached uniform plates , the gap per meter length should not exceed 1.5mm; jaw plate in contact with the supporting surface should be uniform, the gap should be the maximum size of the jaw, for every meter should not be greater than 3mm.

Complete management system is built with R&D Department, Product Department, Quality Inspection Department, Domestic Sales Department, International Trade Department, Financial Department, After-sales Service Department, Human Resources Department etc.. Henan Hongxing Mining Machinery Co., Ltd. values the cultivation and introduction of talents. So far, the proportion of junior college staff has reached 70%. The importance and appointment attached on talents has become an inexhaustible motivation pushing Fote Machinery to move forward. The complete after-sales service system is built to provide professional system solution for clients, and Fote Machinery is making efforts for the maximum benefits for clients. Welcome to visit and order.

Parameters of High Manganese Steel Jaw Crusher and Best Jaw Stone Crusher