XYL-l,XYL-IA,XYL-IB, XYL-IA-4,XYL-IB-lcore rotary drilling rig, Introduction:

XYL-1 (1A, 18, 1A-4, 18-1) Drilling Rig is XY-1 (1A, 18, 1A-4, 18-1) drilling rig that mounted on the rubber crawlers. These drills move easily, with hydrulic feeding

XY-1 type: track-mounted rig, trailer mounted rig

Drill Rigs Features:

rotary drilling rig

1.Being equipped with rubber crawler make the drilling rig moving easily. At the same time, the rubber crawlers won't destroy the ground,so this kind of drilling rig will be convenient for construction in city.

2. Being equipped with hydraulic oil pressure feeding system improves drilling efficiency and reduces labor intensity.

3.Being equipped with ball type holding device and hexagonal Kelly, it can accomplish no-stopping working while lifting the rods and get a high drilling efficiency. Operate with convenience, security and reliability.

4.Through the pressure indicator of bottom hole, the well condition can be observed easily.

5.Having Hydraulic mast, convenient operation.

6.Close levers, convenient operation.

7.The diesel engine starts by the electromotor

Structural Configuration

The drilling rig includes crawler chassis, diesel engine and drilling main body; All these parts will be mounted on one frame. The diesel engine drives drill, hydraulic oil pump and crawler chassis, the power will be transferred to drill and crawler chassis through transfer case.

Application:

Engineering geological explorations for railway , hydropower, highway, bridge and dam etc.; Geologic core drilling and geophysical exploration. Drill the holes for small grouting and blasting.

Technological Data of XYL-l,XYL-IA,XYL-IB, XYL-IA-4,XYL-IB-l core rotary drilling rig :

1.Rubber crawler chassis

Theoretical velocity Normal speeds                              0.9, 2.0, 2.7, 3.2, 6.3, 10 Km/h

Reverse speed                                                      2.1 Km/h

Rated traction power                                                               6 KN

2.Drive system

Turning                                         single side brake and differential gear turning

Clutch                                               dry, two pieces, normal engaged clutch

Transmission case                                              integral gearbox

3.Overall dimensions (L x W x H)

Overall dimensions (L x W x H)                                       3493 x 1170 x 2208 mm

4. Drill weight

Drill weight                                                             2580 - 2660 Kg