SBL series target flowmeter with digital display is a completely new force induction target flowmeter

Developed based on measurement principle of traditional target flowmeter, making full use of most

Excellent features of the same, and in combination with new transducer technology and modern digital

Technology. This product not only features the characteristic of no movable part as in traditional

Flowmeters such as target flowmeter, orifice flowmeter and vortex flowmeter, but also a measurement

Accuracy matching that of volumetric flowmeter. In addition, this product has the performance against

Interference and impurities, and is light and reliable, hence is widely used in petroleum industry, chemical

Engineering, energy industry, food industry, environmental protection and water conservancy etc. SBL

Digital target flow meter is improved from traditional flow meters and can take place of them, such as turbine,

Electromagnetic, ultrasonic, mass, volumetric, vane-wheel, by-pass, orifice, differential pressure flow meter...In terms of

Operation effect, SBL flowmeter has extremely wide applicability, i. E.:

· Applicable to various pipe diameters: From Φ 15 to Φ 2000mm and larger;

· Applicable to high and low temperature media: From -196o C to +450o C;

· Applicable to high pressure operating conditions: From 0 to 42Mpa (gauge).

2)Product features:

A. · Accurate measurement of flow of fluid media such as liquid, gas, steam and viscous media etc. Under
Various normal temperature, high temperature and low temperature operating conditions;

B. · Extremely high sensitivity capable of measurement of ultra small flow (minimum flow that can be
Measured is 0.08m/s;

C. · No movable part, hence high safety and reliability;

D. · High measurement accuracy and precision (reaching 0.2% for measurement of total quantity);

E. · Wide measurement range (reaching 1: 30);

F. · Good repeatability (normally 0.1~0.08%) and fast measurement;

G. · Small pressure loss, only about 1/2P of standard orifice;

H. · Dry calibration can be used, i. E. Poise hanging method;

I. · Target plate can be replaced as required to change flow measurement range;

J. · Capable of online direct reading and remote transmission/signaling;

K. · Easy installation and very easy maintenance.

origion	Tianjian
package	Wooden Case or Carton
trademark	Tianjin U-ideal Instrument
Body material	SS304, SS316L
Caliber	4mm-1100mm