Marine mooring capstan is a vertical axle rotating machine used on sailing ships. It can apply force to ropes, cables, and hawsers. The principle is similar to that of the windlass, which owns a horizontal axle. Typically, it uses a gearbox which trades reduced speed, relative to the prime mover, for increased torque. Our company designs and produces capstan winches from simple light load to combined heavy load, which can lift pearl bags from the ocean floor to 30 ton line pull units for mooring large vessels. Modern capstan winches are powered electrically, hydraulically, pneumatically, or via an internal combustion engine.

Features of Capstan Winch:
1. This capstan can adopt electric or hydraulic drive.
2. Configurations are vertically mounted.
3. Warping head of the capstan uses cast steel.
4. Rated pull of the 1st layer can reach from 3MT to 15MT.
5. Max wire speed of this capstan winch is 20m/min. 
6. Local control is available for customers.

Marine Mooring Capstan
Model	Warping Load(KN)	Speed(m/min)	Rope Dia.(mm)
ACIR-MMC001	10	15	11
ACIR-MMC002	20	15	15
ACIR-MMC003	30	15	17.5
ACIR-MMC004	50	15	20.5
ACIR-MMC005	70	15	26
ACIR-MMC006	100	15	28
ACIR-MMC007	120	15	32
ACIR-MMC008	150	15	36
REMARKS: Driven Mode: Electric / Hydraulic operated. Type: Vertical Type, Electric motor can be vertical or horizontal. Control: Local control, Radio control as option Available Certifcate: CCS, BV, ABS, LR, GL, DNV ACIR can design the products according to your special request.