Product Main

Quick Details

Model Number: PHYM
Brand Name: GAN
Place of Origin: China (Mainland)
Tank Capacity: 500-10000L (130~2650 Gallon)
Flow Range: 4-360L/S (63~1513gpm)
Proportioner Size: Dn80~Dn250 (3"~10")
Working Pressure: 0.6MPa~1.2MPa
Mixing Ratio: 3% or 6%
Type: Vertical & Horizontal

Specifications

Foam Bladder Tank,Pressure Type Foam Proportioning Unit  (PHYM )

The PHYM series Foam Bladder Tank is to provide foam solution for fire foam system. It is mainly consist of pressure tank, bladder, proportioner, control valves, pressure gauge and pipelines. High-pressure water is needed to swap out foam concentrate (stored in bladder in the tank) from the tank as a certain proportion. Foam concentrate then mix with pressurized water and form foam solution. For bladder is separated from the water that it can be utilized next time if not finished. Besides, there is feed inlet to refill or rechange foam concentrate.

Working Principle:
When pressurized water flow through the proportioner, a small part of water (3%~6%) flow into tank from water inlet and press bladder to swap out equal foam concentrate to mix with another part of water (97%~94%) in proportioner. Foam solution flows out from outlet and was supplied to foam generators or foam nozzles through pipelines.

Application:
 The unit usually constitutes foam spray system and low/high expansion foam extinguishing system with pipelines, foam generators and foam nozzles. This unit provides foam solution for these systems through pipelines which are distributed in all destination areas and they are connected with generators or foam nozzles. The system works once there is fire somewhere and solution was transported to destination area through pipelines. Thus destination area gets foam solution to put out fire with foam generators or foam nozzles.
Characteristic:
1.    Big flow pressure range and small pressure loss.
2.    Widely used both in mid-multiples and low multiples foam extinguishing system.
3.    Two types: horizontal and vertical.

Technical parameters:

Working Pressure Range 0.6~1.2MPa
Pressure Drop 0.2MPa
Test Pressure Intensity 1.5MPa
Seal 1.32MPa
Tank Capacity 500~10000L
Size of Proportioner DN80~DN250
Flow Rate 4~360L/S
Mixing Ratio 3% or 6%

 

Notes: we make available customized design for our clients