IEC60061-3 7006-121-1 GU10 lamp cap gauge go no go gauge

"Go" and "Not Go" Gauge for bases GU10 (7006-121-1) is strickly designed by IEC60061-3.

IEC60061-3 GU10 Gauge

Purpose:

To check the base GU10 in the following respects:

---- the diameter of the individual pins (dimension A);

---- the combined displacement and diameter of the pins (dimension A and D)

---- the length of the pins (dimensions F1 plus J);

---- the recess length and diameter of the pins (dimensions F2 and E)

 

Testing:

It shall be possible to insert the individual pins of the base from surface Z into the hole "a1" and remove the pin along the slot. It shall not be possible to insert the pins of the base into hole "a2". It shall be possible to insert the base into the gauge until the reference plane of the base is in contact with surface Y of the gauge. In this position, the ends of the pins shall not project beyond the surface of the gauge.