C type hydraulic press
Characteristic



1 the whole welding solid open type structure can make the body to maintain enough rigidity and has the most convenient operating space;
2. The pressure, travel, insurance pressure time and shut height can be according to demand without regulation, can also be designed for two speed (idling speed, pressure slow) and in the length of stroke can be adjusted within the speed and;
3 other optional increasing force transducer and display the products stress condition, achieve the desired purpose;
4 can be additionally added to the electronic ruler.grating ruler.display, accurate display of cylinder displacement, to achieve the desired purpose;
Scope of application:
The series hydraulic machine is suitable for metal or non metal parts stamping, molding, shallow drawing, shaping and pressure assembly; motor rotor and stator pressing, electronic connectors and electric parts of the press fit glasses, locked modes and hardware parts of repression;
XTM-107 series floor type hydraulic press:
Scope of application: (bow hydraulic machine, precision hydraulic punching machine, electric appliance fittings pressing machine, hydraulic pressing machine, riveting equipment, hydraulic plastic button punching machine)
The series hydraulic machine is widely applicable to various materials of punching, stamping, plastic, riveting. Bending, shear, tensile, and auto parts pressing, a variety of small parts of the press fit, assembly. A versatile punch. Is TM103C series of product upgrades, the advanced composite cylinder hydraulic circuit. Both the noise, speed, power consumption, is better than that of ordinary hydraulic press is a high efficiency, high speed, high output power, high environmental protection, a new generation of hydraulic press.
Product features:
The 1 series of hydraulic press based on 2-20MPA fluid pressure as the power source, external three-phase AC380V 50HZ or 60HZ AC220 three-phase AC power supply.
2. The series equipment in liquid as the medium to transmit energy, using advanced composite cylinder hydraulic circuit, low oil temperature, air travel speeds are in 150MM/ seconds or more, industry and trade into the speed of 30 mm / sec below
3 equipment standby, slide up and down when the noise is not more than 75 dB.
4 the whole welding solid open type structure, can make the body to maintain adequate steel, also has the most convenient operating space,
5. Break up and semi-automatic two control modes, manual can be pressing die stopped at arbitrary distance range, equipped with emergency recovery button, the installation of infrared hand device.
The 6 series of press pressing stroke by the timer, the pressure switch, position sensor, or the customers own mold control
7 the pressure of the main shaft of the pick-up height can be adjusted by the timer, or the location of the sensor can be adjusted within the range.
9 pressure, travel, time, close the height of the customer can adjust their own, easy to operate;
10 hydraulic system of built-in rack, the appearance of clean, lightweight, stable.
11 with automatic counting function, but also with force measuring display, intelligent temperature controller, customized according to customer requirements,
12 this series of hydraulic machinery output range has TF 15tf-100 all kinds of specifications for selection. (1tf=1000kgf=9.8KN)