Tianjin U-ideal Piston Type Solenoid Valve;Water/Steam Solenoid Valve
Solenoid Valve Standard technical parameters
The high pressure solenoid valve according to the structure is divided into pilot piston and zero pressure differential direct acting control type. Flow size is less than 2.5 for direct acting type and the flow size in 8-25 as the pilot type. The body material as: wrought brass and stainless steel. Mainly used in industry gas, high pressure gas and liquid etc.
Body
Interface size: 1/8-1''
Flow diameter: Normally closed type: 1-25mm
Body material: Wrought brass, 304, 316
Connection type: G thread
Pressure class: 0-100bar
Structure type: 1-2.5mm for direct acting type
8-25mm for pilot type
Control type: Normally closed
Components
Seal material: VITON
Medium temperature: 0-100C
Ambient temperature: 0-65C
Install way: According to the body tag to install, in order to enhance the valve service life, better coil upward, horizontal installation;
Coil voltage:AC24V/110V/220V/230V/240V 50/60HZ DC24V/12V ±10% fluctuation allowed
 

Characteristic	1)Gurantee:one year 2)Life time: 1 million 3)Rohs brass
Medium	Air, water,steam etc.
Temperature	NBR:   -10°C to 80 °C EPDM: -10°C to 120 °C VITON:-10°C to 150 °C PTFE seal :-20°C to 200 °C
Pressure	0-1.6Mpa
Port size	1/8',1/4'',3/8',1/2'
Port thread	G,NPT,PT
Orifice	1.6,2.5,3.0,3.5,4.0,4.5,5.0,6.0,8.0mm
Voltage	DC-12V,24V,36V AC-24V,120V,110V,220V/50HZ
Tolerance	±10%
Coil	S91B,22VA(AC),17W(DC) IP 65,100% ED
Special coils	Latching coil:DC6-24V as requested
Material	Body- brass or stainless steel Seal- NBR,EPDM,VITON,PTFE Amature tube-stainless steel 304 Plunger-stainless steel430F Stop-stainless steel 430F Springs-SS304 Shading rings- stainless steel 304