Product Main

Specifications

Introduction:

1. Mix ice cream powder and water by a ratio of 1:2.5 to 1 : 3.5

2. put the ice cream powder with a good environment at room temperature and let stand 15-20 minutes

3. Feed the ice cream powder after standing into the tank. Ensure both tank with same much material. The material must be over discharge port.

Note: ice cream material can't agglomerated.(The material of the each cylinder at least 3 kg)

4. Machine electricity, check the machine on the display panel on the left shows the hardness and observe whether the right hardness is greater than 1.0 to 2.0 on the left. If not, then adjust the hardness on the right is greater than left between 1.0 to 2.0 (SET SET hardness suggestion: setting at around 5.1, the new machine had better not more than 5.5)

5. keep machine into standby mode, press on both sides of the handle to the next, until you can come up out of the material, so that the material flows out 1-2 cup material come until after the flow was smooth.

6. Feed the flow out material back to the material cylinder, press cleaning, cleaning 5 to 10 minutes

7. Click the button to the washing machine into standby mode

8. Click refrigeration key state machine into refrigeration, refrigeration 15-25 minutes you can press ice cream

 

Feature:

The whole machine adopts the stainless steel body, strong and durable with novel design, reasonable structure, convenient operation, this product USES the Japanese mitsubishi cooling technology, the digital computer control system, use famous brand electrical components with high quality, advanced production technology, fault diagnosis, cake soft arbitrary modulation, automatic repair function, security precision, higher reliability. All smooth mechanical mixing system, lower noise, less vibration, make the machine running performance reached the international advanced level.

 

Advantage:

Our Ice cream machine adopts mature professional refrigeration system design, selection of world famous brand of high-power special compressor, greatly shorten the molding time ice cream, ice cream production increased substantially the same time, make your business still handy when hot, create wealth for you. Has safe smooth mechanical mixing system, lower noise, less vibration, make the ice cream machine running performance reached the international advanced level.

 

 

 

Parameters:

Model

LG-L16B

Voltage

220V/50HZ

Capacity

16-18L/H

Dimension

500*670*1280mm

Weight

120KG

Material

Stainless Steel

Power

1450w

Refrigerant

R404/R22