| Machine Type: | Abrator |
|---|---|
| After-sales Service Provided: | Engineers available to service machinery overseas |
| Material: | Metal / Coil |
| Industry Used: | foundrysteel industry |
| Cleaning Type: | shot blasting cleaning |
| Cleaning Process: | abrasives |
| Use: | Burnishing,Descaling / Stripping |
| Certification: | CE |
| Fuel: | Electric |
| Feature: | Critical Cleaning / Residue Free,Non-Ionic,Non-Toxic,rust removeclean, |
| Model Number: | QG series |
| Brand Name: | Qinggong |
| Place of Origin: | China (Mainland) |
| Condition: | New |
| Blast chamber: | Mn65 steel |
| Impeller: | High chromium wear resistant cast iron |
| Shot blast machine type: | Hook type/overhead rail/roller conveyor/pass-through/rotary table |
| Machine key parts: | Omron/Scheider/ABB/NSK |
| Omron/Scheider/ABB/NSK blast wheel: | The best ratio of flow*launch speed of shot |
| Dust emissions: | Below 3 mg/cbm |
| Dust clean: | 4 grades dust cleaning no pollution |
| Handling workpieces: | Concrete,steel,brick,stone |
| Equipment assembly: | Executive standard: european standards |
Quick Details
Specifications
Specifications:
| Model | QGLM200 | QGLM250 | QGLM550 | QGLM800 | ||||||||||
| Power(kw) | 14 | 18 | 29 | 38 | ||||||||||
| Effective leaning width(mm) | 200 | 250 | 550 | 800 | ||||||||||
| Productivity on concrete(m2/h) | 80 | 120 | 300 | 450 | ||||||||||
| Travel speed | 0.5-23 | 0.5-23 | 0.5-25 | 0.5-20 | ||||||||||
| Dust collecting type | Blowback cartridge filters | Blowback cartridge filters | Blowback cartridge filters | Blowback cartridge filters | ||||||||||
| Travel type | Horizontal,self-propelled | Horizontal,self-propelled | Horizontal,self-propelled | Horizontal,,self-propelled | ||||||||||
| Overall dimension(mm) | 1300*400*900 | 1600*430*1016 | 2050*720*1460 | 2150*980*1450 | ||||||||||
| Weight | 160 | 335 | 595 | 770 |
Advantage:
a.High quality surface appearance
b.High productivity efficiency
c.Low cost
d.Environmental friendly
Introduction:
Qinggong horizontal movable shot blasting machine is a cost-effective and environmentally friendly method for preparing concrete and steel surfaces.This labor and time-saving process strips,cleans and profiles simultaneously.It leaves the surface immediately ready for the application of coatings or overlays.
Use
>Concrete
1. Prepares concrete for recoating or application of overlays
2. Removes markings,dirt and old coating
3. Prepares parking lots and garage decks
4. Used on airport runway,bridge decks,highways,etc.
>Steel
1. Removes paint,rust,mill scale and marine growth
2. Cleans ship,aircraft carrier decks and offshore platforms
3. Removes nonskid coatings
4. Prepares petroleum and water storage tank Other surfaces
>Other surface
1. Cleans brick or stone
2. Removes paint pavement markings from asphalt surfaces
Packaging: pallet and wooden box
Delivery time : within 20 work days after confirmed deposit
Welcome you to visit our factory !!!