The incinerator HYINC-18 is equipped with single door in front, which are intended for loading
Of solid waste and ash removing, the incinerator in stand-by mode(COM. Tem. Less than 220° C), the doors can be opened properly. If the incinerator is running in cooling down mode, the door can be opened till COM. Tem. Less than 100° C and incinerator fully stop.

The electrical control panel is installed on the incinerator and it contains fuses, starters, PLC and
Operator panel. The electric panel is built according to international standards for marine equipment.

The operator panel which is located at the right side of the control panel has a touch screen and
Defined keys for system starting/stopping and selecting burner modes. The burning process is controlled by the PLC and monitored by the HMI(human machine interface)and scanned by a photo resistor. The combustion chamber temperatures are also regulated automatically by the PLC control system.

Technical Data:

Type  INC-18  
Capacity 180,000 kcal/h ( 208KW)
22.5 kg/h IMO sludge oil
14,4000Kcal/h solid waste IMO sludge (20% water content) IMO class 02 solid waste
Combustion chamber temperature Max.           1180 8C Working        850-1150 8 C  
Flue gas temperature Max.            375 8C Working         250-340 8 C  
Surface temperature Less than ambient temperature +20 8 C , and less than 60°C  
Electrical power Consumption 7kW  
Negative pressure 5-35 mm WC Negative pressure in combustion chamber
Total weight 1500 kg  
Outline dimension   See dimension drawing (APPENDIX