YC-015 Lab Spray dryer(mini spray dryer) have been applied by over 2,500 domestic customers of first class universities, enterprises and research institutes including AMSS Institute of Systems Science, Tsinghua University, Shanghai Jiao Tong University, South China University of Technology, Wuhan University, Tongrentang, Xiehe Pharmaceutical, Bright Dairy, Hong Kong Polytechnic University, Harbin Pharmaceutical Group, Strong Group, General Electric (GE) Shanghai R&D Center, Jiangnan University, China Agricultural University, Zhejiang University, Tongji University and Huazhong University of Science and Technology, and exported to over 30 countries and regions such as the United States, Italy, South Korea, Singapore, Canada, Malaysia, Chile ,Russia and so on, respecting reputation in view of good product quality.

YC-015 lab spray dryer (mini spray dryer)is self contained and supplied complete and ready for immediate operation. All major components are housed within a stainless steel cabinet and the unit can be used on a bench top or with an optional stainless steel stand. The system was designed to be stand by a keyboard, conducted by a colorful crystal screen of touch guidance mode , and allowed two modes of run: Automatic-mode, and Eye-monitored mode for the purpose of easily controlling experimental process .

YC-015 lab spray dryer operating principle

PLC controller allows the selection of inlet temperature, airflow, automatic de-blocker frequency and pump speed. The self-priming peristaltic pump delivers the sample liquid from a container through a small diameter jet into the main chamber. At the same time an integral compressor pumps air into the outer tube of the jet which causes the liquid to emerge as a fine atomised spray into the drying chamber.

Heated air is blown through the main chamber evaporating the liquid content of the atomised spray. The solid particles of the material, which are normally in a free flowing state, are then separated from the exhaust air flow by a cyclone and collected in the sample collection bottle. The exhaust airflow is directed through a flexible 60 mm diameter hose direct to atmosphere or to an existing extraction system.

YC-015 lab spray dryer technical parameter

1.   Automatic-mode and Eye-monitored mode for the purpose of easily controlling experimental process ,English interface.

2.       Evaporation rate of water at inlet temperature of 250oC using Standard:Approximately 1500 ml/hour

3.       Air inlet temperature range 30oC to250oC

4.       Air outlet temperature range 30oC to 140oC

5.       Max. Sample feed: 1500ml/h

6.       Min. Sample : 30mL

7.    To assure accurate temperature control and easy parameter adjusting, YC-015 applies PID. Temp. Precision:±1℃, dry cycle time: 1.0-1.5S

8.      As standard a touch screen to display temperature, airflow volume, air pressure,pump speed and de-blocker frequency.

9.     standard with 0.7 mm jet and other sizes are available as accessories(0.5mm 1mm 1.5mm 2mm)

10.Spray chamber, cyclone separator, receiving tank are all made of Borosilicate glass which can resist strong acid/alk li, high temperature. It can work in a no-pollution and stable environment, and the whole process can be inspected. All the spare parts are easy to install and wash.

11.    Power: 3.5KW AC220V

12.    With cooling device for temperature-sensitive material  (optional)

YC-015 lab spray dryer applications

Spray drying can be used in a wide range of applications where the production of a free-flowing powder sample is required. This technique has successfully processed materials in the following areas:

Beverages ? Flavours and Colourings ? Milk and Egg Products ? Plant and Vegetable Extracts ? Pharmaceuticals ? Heat Sensitive Materials ? Plastics ?  Polymers and Resins ? Perfumes ? Ceramics and Advanced Materials ?

Soaps and Detergents ? Blood ? Dyestuffs ? Foodstuffs ? Adhesives ? Oxides ? Textiles ? Bones, Teeth and Tooth Amalgam and many others. Most solutions and suspensions can be spray dried providing that the resulting product has the characteristics of a solid material.

Shanghai Pilotech Lab Spray Dryer  With firm grasp of domestic market advantage, Pilotech also vigorously (Model YC-015A lab spray dryer can be used for organic & water solvents, Model YC-1800 lab low temperature spray dryer can be used for thermo-sensitive materials and high carbohydrate compositions materials. Model YC-2000 lab vacuum spray dryer can be used for probiotics, enzyme and other thermo-sensitive materials. Model YC-3000 Lab spray freeze dryer is a new freeze dryer method which is faster than traditional freeze dryer. Model YC-1000 laboratory spray granulator (fluidized bed granulation) can be used for granulation and coating.)