Main function

-Grinding motor:

Specially designed water-cooled grinding motor, cooling liquid ejected from the the ring wheel center position from the shaft hole, spread over the surface of the grinding wheel and blade evenly
-blade cooling effect is good, not easy to burn knife
-clean, will not produce splashing water droplets and steam
-improve the utilization of the coolant, reduce sharpening costs

The grinding head can move back and forth
You could magnify the width of the flat and aim at grinding blades for special

specifications

Frequency converter speed  ( Travel moving )

Travel speed :3～18 M/min    (adjustable )

Grinding speed : 980 rpm

Auto feeding Grinding wheel

To achieve auto feeding by by PLC control

The wheelhead adopts sand tile structure and could prolong 1/3 wheel life

Gear rack drive
-accurate transmission ratio and great transmission force
- big transmission span, smooth transmission
-transmission ratio and distance can be changed, easy to operate, convenient  maintenance and low maintenance costs
- low requirements of the application environment, able to work in high-temperature, overload, low speed, dust environment

Gantry machine body

Machine body is processed by heat-treated high quality carbon structural steel , durable and good stability

Wheelhead is sandwiched in the middle of the two guide rails for the workpiece processing and reciprocal motion, the grinding wheel cutting surface is below the intermediate of the two tracks
-Wheelhead processing more stable, smooth
- blade and grinding wheel could be more comprehensive cooling, improve the cooling effect
-relaxed bed span to make the workpiece not need secondary clamping and solve the waviness of the cross section to protect the blade

Electromagnetic chuck turret Desk
The special Grinder dedicated electromagnetic chuck
- uniform suction, the blade should not be deformed, and sharpening will be more straight
- easy to operate, high efficiency
- With delay demagnetization, reliable fixed position, safer operation

Adopts stable workbench

Linear guide

- self-aligning capability, could get accurate stable smooth motion, the stability of the travel drive
- with high rigidity for all directions, could withstand the load from top and bottom, left and right direction and the rails are more durable

- Adopts imported high quality linear guide and easy maintenance and also could replace.

Centralized refueling device

With one-time centralized refueling (including position of lubrication of the main cabinet, lifting pallets, lifting screw) , it is convenient and time-saving.

Automatic cleaning device

Automatic cleaning the ash of wheel and iron inside machine body

-Adopt inner jet wheelmotor, could cool and cleanthe surface of the grinding wheel evenly,

Increase sharpening accuracy, extend wheel life.

-When the machine is grinding, a pipe automatic spray and wash the surface of blade

grinding and keep incision clean; another two pipes within the groove wall of the machine

body side by side and cleaning rinsing automatically.

 

Automatic filter device

Located at the outlet of the equipment , could clean the residue from the automatic cleaning device ,collected to the slag tap, and filtration, magnetic attraction, purification treatment
-automatically collects wastewater and slag, automatic purification, automatic recycling cooling water, full automatic (no manual)
-filtered cooling water after purification could recycle use and save every drop of water
-Roller magnet could adsorb grinding knife flowers effectively and process purification of industrial waste water immediately , energy saving and environmental protection
-No wastewater slag leakage, keep ground and work environment clean

Model	Maximum grinding length	Overall dimensions (LxWxH)	Weight
DMSQ-1700G	1700mm	4080 x 1620 x 1820mm	4000Kgs

 

Technical parameters

SPECIFICATION		parameters
Max size of workpiece	L	1700 mm
	W	320mm
	H	125 mm
Work tablerotation range	0°
Travelling speed	3-18m/min(Frequency converter control)
rotation speed	grinding head	980 rpm
angle of inclination	grinding head	0-5°
Max vertical movement	grinding head	150㎜
Feeding range	single stroke, automatic vertical feed	0-0.05mm
Hand wheel dial	0.0085mm per unit
Box top ratchet wheel	vertical feed	0.05mm/per tooth
Work table(magnetic chuck )	length	1700mm
	width	320mm
Grinding wheel size		Φ300 grinding segment
power	Grinding motor	Y2-225M-6   30kw
	Reciprocating motor	Y90S-P4  1.1KW
	Coolant pump	QX1.5-30-0.75KW
	Clear waste motor	NMRV30-60-Y0.09KW