Machine Type: | Abrator |
---|---|
After-sales Service Provided: | Engineers available to service machinery overseas |
Material: | Metal / Coil |
Industry Used: | foundrysteel industryairporthighway,road |
Cleaning Type: | shot blasting |
Cleaning Process: | shot abrasives |
Use: | Burnishing,Container / Bottle Cleaning,Deflashing,Descaling / Stripping,Sterilizing / Disinfecting |
Certification: | CE |
Fuel: | Electric |
Feature: | Critical Cleaning / Residue Free,Non-Toxic,Rust / Corrosion Inhibitor,cleaningrust remove, |
Model Number: | QG series |
Brand Name: | Qinggong |
Place of Origin: | China (Mainland) |
Condition: | New |
Blast chamber: | Mn65 steel |
Impeller: | High chromium wear resistant cast iron |
Machine key parts: | Omron/Scheider/ABB/NSK |
Omron/Scheider/ABB/NSK blast wheel: | The best ratio of flow*launch speed of shot |
Dust emissions: | Below 3 mg/cbm |
Dust clean: | 4 grades dust cleaning no pollution |
Handling workpieces: | Concrete,steel,brick,stone |
Equipment assembly: | Executive standard: european standards |
Shot blast machine type: | Hook type/overhead rail/roller conveyor/pass-through/rotary table |
Quick Details
Specifications
Specifications:
Model | QGLM200 | QGLM250 | QGLM550 | QGLM800 | ||||||||||
Power(kw) | 14 | 18 | 29 | 38 | ||||||||||
Effective leaning width(mm) | 200 | 250 | 550 | 800 | ||||||||||
Productivity on concrete(m2/h) | 80 | 120 | 300 | 450 | ||||||||||
Travel speed | 0.5-23 | 0.5-23 | 0.5-25 | 0.5-20 | ||||||||||
Dust collecting type | Blowback cartridge filters | Blowback cartridge filters | Blowback cartridge filters | Blowback cartridge filters | ||||||||||
Travel type | Horizontal,self-propelled | Horizontal,self-propelled | Horizontal,self-propelled | Horizontal,,self-propelled | ||||||||||
Overall dimension(mm) | 1300*400*900 | 1600*430*1016 | 2050*720*1460 | 2150*980*1450 | ||||||||||
Weight | 160 | 335 | 595 | 770 |
Advantage:
a.High quality surface appearance
b.High productivity efficiency
c.Low cost
d.Environmental friendly
Introduction:
Qinggong horizontal movable shot blasting machine is a cost-effective and environmentally friendly method for preparing concrete and steel surfaces.This labor and time-saving process strips,cleans and profiles simultaneously.It leaves the surface immediately ready for the application of coatings or overlays.
Use
>Concrete
1. Prepares concrete for recoating or application of overlays
2. Removes markings,dirt and old coating
3. Prepares parking lots and garage decks
4. Used on airport runway,bridge decks,highways,etc.
>Steel
1. Removes paint,rust,mill scale and marine growth
2. Cleans ship,aircraft carrier decks and offshore platforms
3. Removes nonskid coatings
4. Prepares petroleum and water storage tank Other surfaces
>Other surface
1. Cleans brick or stone
2. Removes paint pavement markings from asphalt surfaces
Welcome you to visit our factory !!
If you have any question please feel free to contact me
Beca