FDSP design, manufactures, and provide complete solution of wood/biomass
pellet plant. The raw materialscan be any wood waste and biomass particles,
such as wood sawdust, wood shavings, wood chips, wood logs, straw, rice husk, sunflower husk,napier grass, paper sludge, EFB, alfalfa hay, etc.
Description of Wood pellet plant
Every machine in the wood pellet plant can be designed and manufactured
according to customers' requirements. Professional technical guidance of
installing the machinery is also available. The whole process of wood pellet line can be highly automatically controlled. It includes the below processes.
1. Crushing process - wood chipper and wood Hammer mill
The best material size for supporting to produce pellet is 1-5mm. Thus if your
material size exceed 5mm, then you need crushing machine to crush and grind
them into small powder 1-5mm.
Our LYGX series wood chipper and MFSP series hammer mill are your best
choice. It mill sraw material like tree branch, wood shavings, wood chips,wood
logs,cotton stalk,corn stalk,wheat straw etc, with size less than 50mm (diameter). After milled, the output sizecan reach 3-5 mm, then it is pushed to next process to get dried and pelletized.
2. Drying process - Rotary Dryer
The best moisture content to pelletizing is about 12-18%. Our rotary dryer is
made up of burning stove and main rotary dryer which is high efficiency in dryingthe wood and biomass material. It can realize to reduce the moisture from 50% to10%. The rotary dryer uses steam to heat air and contact material to remove certain degree of moisture.It is very important for wood pellet plant to using moisture detector which will determine the most suitable moisture before
pelletizing.
3. Pelletizing process - Wood pellet mill
Pellet mill is the heart of the wood pellet production line, and has reliable running performance. It is special designed for compacting of wood, straw, and other biomass sources into pellets. Capacity ranges from 1T to 10T per hour. Our
MZLH series Ring die pellet mill is best choice for large scale production.
4. Cooling process - Counterflow cooler
Usually after pelletizing, the temperature of wood pellets is between 60-80
degrees and the moisture content is close to 15%. For storage purposes, a coolermust beused to reduce their surface temperature and the moisture content,
also help screen good and pure pellets.
5. Packing process - Packing machine
After cooling process, the wood pellets will not directly enter into the fuel process,avoiding the wood pellet affected with damp, the packing process is very
necessary.The packing process is effectively handled by our Semi-auto packing
Machine.
Please kindly note:we can customize the complete pellet plant according to your request for capacity and your raw materials condition.
Customers visit and certification(CE/SGS/GOST/ISO9001)
Any need, please do not hesitate to contact us!
pellet plant. The raw materialscan be any wood waste and biomass particles,
such as wood sawdust, wood shavings, wood chips, wood logs, straw, rice husk, sunflower husk,napier grass, paper sludge, EFB, alfalfa hay, etc.
Description of Wood pellet plant
according to customers' requirements. Professional technical guidance of
installing the machinery is also available. The whole process of wood pellet line can be highly automatically controlled. It includes the below processes.
1. Crushing process - wood chipper and wood Hammer mill
The best material size for supporting to produce pellet is 1-5mm. Thus if your
material size exceed 5mm, then you need crushing machine to crush and grind
them into small powder 1-5mm.
Our LYGX series wood chipper and MFSP series hammer mill are your best
choice. It mill sraw material like tree branch, wood shavings, wood chips,wood
logs,cotton stalk,corn stalk,wheat straw etc, with size less than 50mm (diameter). After milled, the output sizecan reach 3-5 mm, then it is pushed to next process to get dried and pelletized.
2. Drying process - Rotary Dryer
The best moisture content to pelletizing is about 12-18%. Our rotary dryer is
made up of burning stove and main rotary dryer which is high efficiency in dryingthe wood and biomass material. It can realize to reduce the moisture from 50% to10%. The rotary dryer uses steam to heat air and contact material to remove certain degree of moisture.It is very important for wood pellet plant to using moisture detector which will determine the most suitable moisture before
pelletizing.
3. Pelletizing process - Wood pellet mill
Pellet mill is the heart of the wood pellet production line, and has reliable running performance. It is special designed for compacting of wood, straw, and other biomass sources into pellets. Capacity ranges from 1T to 10T per hour. Our
MZLH series Ring die pellet mill is best choice for large scale production.
4. Cooling process - Counterflow cooler
Usually after pelletizing, the temperature of wood pellets is between 60-80
degrees and the moisture content is close to 15%. For storage purposes, a coolermust beused to reduce their surface temperature and the moisture content,
also help screen good and pure pellets.
5. Packing process - Packing machine
After cooling process, the wood pellets will not directly enter into the fuel process,avoiding the wood pellet affected with damp, the packing process is very
necessary.The packing process is effectively handled by our Semi-auto packing
Machine.
Customers visit and certification(CE/SGS/GOST/ISO9001)
Any need, please do not hesitate to contact us!