Product brief introduction The prints of the watermark ink have the same effect as watermark paper. Under the sun, we observation can see a clear pattern of the watermark. Because of low-cost, and watermark don't need dedicated machines to identify, so it is widely used in the printing documents and brochures.

 

Color White and Black Operation Guide White Watermark- Offset Operation Guide

 

1, Suggest use new ink roller, or use reducer agent to cleanout the ink roller downright. (reducer agent 3-4 branches)

 2, In order to make the ink don't adhibit to machinery, every bisect printing machine must accede quarter wetting powder in water;

3, Such as printing effect is not ideal, can be used in the ink roller hair dryer blowing gently on a minute;

4, This ink will have a slight corrosion on the PS, such as the shutdown after a reboot to replace the PS, the printing more difficult, we must combine printing technology;

5, If the temperature is low not be appropriate to put ink, we can properly add offset watermark expert melody ink.

6, 1 kg ink can be printed about 6, 000 sheet of paper Screen-White Watermark

1, Screen-White Watermark needs to add 300-500g solvent when printing, mixing into aquiform ink.

 2, advice: Use 420 item screen printing, if dense, add to 30-50 thread.

3, 1 kg ink can be printed about 1200 sheet of paper.

4. Use 700 impregnant to dilution. 5, Must dry the impregnant for 3-5 hours after printing, or the ink will spread to make the lathework fuzzy.

 Screen-Black Watermark 1, Screen-Black Watermark is printed between two pieces of carbon paper, use 350 item screen printing forme. 2, print on the back of paper if the paper is single-side, use 420 item screen printing forme. 3, so as to approach the effect of watermark paper, can add to 30-50 thread on the edge of lathework. 4, use 700 impregnant to dilute.