| Model Number: | HSK63F Tool Forks HSK F63 |
|---|---|
| Brand Name: | RICO |
| Place of Origin: | China (Mainland) |
Quick Details
Specifications
HSK 63F CNC Tool Holder Fork for Auto Tool Changing Wood CNC Router
This tool holder fork is the HSK 63F Tool Fork, used with , like used with .
HSK 63F Toolholder Fork Specifications:
1. Made in China, famous brand,
2. Imported USA Dupont white plastic material, high quality, reinforced and anti-explosion.
3. Dynamic balance grade: G2.5, 30000rpm
4. Yaw precision: 0.005mm
HSK 63F tool fork is for your HSK63F CNC toolholder, used with or . These HSK 63F forks are found on many including; Biesse, CNT Motion, CR Onsrud, DMS, Flexicam, Multicam, Northwood, among others.
Maintenance: Tool forks wear out over time. If the spindle is not clamping the tool properly, it may be the tool fork is worn which causes alignment issues. Always insert and remove tool holders laterally. Tool forks should be mounted in an area to reduce the exposure to cutting chips and debris as much as possible. Replace if worn or damaged. The tool holders and spindle taper must be maintained as well. A clean taper, free of debris and burrs will help prevent the tool from sticking. Apply a light coat anti-seize compound to the taper on a regular basis.
Note: Never blow compressed air into the spindle taper.
Compatibility: Can be used with all HSK 63F tool holders.
We also can supply white and black ISO30 toolforks, DIN30 forks, BT30 tool forks, BT40 toolforks, etc
Welcome your inquiry!