Interlocking Loop type alpaca hurdle is available for uneven level.Loop type coupling arrangement.The infilled pickets could be bars or welded mesh.With top and bottom steel loop welding,it's easy to install and remove.

Surface finish could be galvanized or powder-coating

If panel infilled withe bars,bars quantity is 4-8 rails.

Product Description:

The ideal light weight solution for temporary pens and handling.

Dimensions:

1220mm Long x1200- 1570mm High hurdle
1830mm Long x 1200-1570mm High hurdle
2440mm Long x 1200-1570mm High hurdle

And if 7 rails,970mm high, sizes: 3ft, 4ft in stock, 5ft, 6ft in stock, and 8ft in stock long.  

Customized size is acceptable.

The intended use for interlocking sheep hurdles is to form large holding pens or small individual pens. If used for long single runs of lambing pens or back to back lambing pens some joints will need to be cable tied together.

 Part Meshed Lambing Hurdle can be used to form banks of single runs, or back to back runs of lambing pens due to top loose ring and fixed 60mm x 60mm bottom lug type coupling arrangement.Not compatible with standard 7 rail interlocking sheep hurdles

1050mm high with 5 horizontal rails and clad with 50mm x 50mm weldmesh up to height of 524mm from finished floor level. Available sizes: 4ft in stock and 6ftin stock