The advantage of wood sawdust pellet making line

A. Five characteristics of wood sawdust pellet making line

1.Vertical feeding.

2. Die is static while roller is rotary; materials are evenly distributed because of the centrifugal force produced by rotary rollers.

3.Double-layer-die. Double layers can be used independently to cut down costs; and two layers of the die also can be used at the same time to improve efficiency and capacity with fewer energy.

4.Ring die and vertical structure are useful in cooling pelletizing room.

5.Independent and frequency conversion discharge device can improve rate of pelleting.

B. Three differences of wood sawdust pellet making line

1.Upward mould, special structure, vertically feeding which are help to heat: material drop into the pelletizing room vertically with no other auxiliary power device.

Horizontal type ring die pellet mill: the feed inlet and pelletizing room are set in one side, which make light material feeding into the pelletizing room difficultly. So additional force pressing device is needed for feeding; the lifetime of gearing(gear, bearing) is shorten because the pelletizing room couldn't dissipate heat.

Flat die pellet mill mainly has two structures, though they can be feed vertically but both of these two structures have many disadvantages which are difficult to get rid of:

(1) Die rotates to make pinch rollers running: material is easily arched which lead to uneven feeding.

(2) Rollers rotate while die is static. This could avoid the arching material, but centrifugal force is caused which will swing the material in the pelletizing room to the periphery; and material distributes unevenly which make the center of the flat die with upward pelletizing holes has no material to press.

2.Efficient centrifugal pellet mill: die is static, roller rotates, materials are centrifugal and distributed around evenly one the inner surface of die because of the high rebounding-effect die.

Ring-die pellet mill's rollers are static and die is rotary so there is no centrifugal force, materials are distributed unevenly.

Flat-die pellet mill's rollers can rotate to generate centrifugal force, but the directions between die holes and material force are contradictory.

3.Efficient centrifugal wood sawdust pellet making line:

(1)double-layer die

(2) multi-function

(3)high efficiency: die has upper and lower parts; customers can choose two different aperture within one die to produce different specifications of pellets. When pelletizing easy bonding materials, we can heighten the rollers and use two-layer dies to get four-fold capacity. No flat die or ring die pellet mill can do this.