From the electrolysis temperature from 60 to 80 DEG C, different pressure of wet chlorine gas, the chlorine washing tower, titanium cooling tower, mist separator, filler drying tower, combination drying tower obtained dry chlorine gas sent to the back section of the processing or use of the turbine pressurization, then using Nessler's pump pressure, acid mist points away from the device must be placed in the nano's pump after. The concentration of 98% sulfuric acid from the combined drying tower top tower plate with metering pump input, one after another through the tower section, the packing section and the packing dry tower, the concentration decreased to 70~75% after discharge, combined drying tower, packing dry tower packing section of sulfuric acid pump forced circulation cooling. Titanium cooler and water separator to separate out the chlorine water back into the chlorine washing tower, tower exhaust chlorine after dechlorination heat exchanger heating dechlorination, chlorine gas back into the washing and cooling tower, compliance of hot water discharged into the trench.

Technical characteristics:

1. The drying efficiency is high: single tower water content less than 150-400ppm, less than 25-100ppm moisture tower process.

2. System pressure reduction: the maximum pressure drop can be controlled within the range of 500-800mm water column.

3. Operating flexibility is good: the maximum and minimum load ratio reached 4.

addition to fog effect is good: in addition to the fog is not the basic fog.

5. Good corrosion resistance: the main equipment using high corrosion polymer composite materials, with excellent overall corrosion resistance, in ten years, the main equipment maintenance free.