Parameters unit :DK7740S
Table Size (LxW) mm :900*660;
Table Travel (XxY) mm :400*500;
Max. Cut Height mm: 300;
Max. Cut Taper degree/mm :6/80;
Max. Cut Speed Squaremm/min: 200;
Precision (Octagon) mm :0.01;
Max. Current A :8;
Roughness (Multi-Cut )um :1.0;
Wire Diameter mm: 0.15-0.20;
Wire Speed m/min: 4-11;
Table Load kg :800;
Working Solution :NG-1Emulsifying soap/JARA-2
Water Tank L: 80;
Voltage :3N-380V/50Hz;
Rated Power kVA: 1.8;
Wire Frame: Adjustable
Dimension (LxWxH) mm :1830*1340*2060;
Machine Weight T: 2.5;
Controller: HF/Autocut;

CNC system
Standard high quality industrial computer withIndustrial LCD monitors
Large memory and wide range of machining parameters storage
Operating platform is WindowsXP/UNIX
Inside auto-programming
Communication: RS232, USB, LAN
Axis controlled: 4 simultaneous
Menu language: English and Chinese
ISO code: G code

Control functions
1. Control axes: 4-axes (x/y/u/v) simultaneous
2. Input mode: Serial port, LAN, USB, floppy disk and keyboard
3. Code: ISO code, 3B code or DXF file
6. Backlash: 0-127um of 4-axes (x/y/u/v)
7. Pitch compensation: X/y/u/v axis
8. Wire offset: 0-9.999mm
9. Machining mode: File mode: 3B, DXF file can be translated to ISO file
Cale coefficient: 0.0001-9999.9999 Rotation angle: Arbitrary
Symmetric: X/y/x/y (center symmetric)
10. Move mode:
Single step move: ± 1um, ± 10um, ± 100um, ± 1000um
Quantitative move in variation speed
Fast-moving function
11. Automatic edge positioning
12. Automatic vertical positioning
13. Figure display:
Top and bottom plane of work piece
Top and bottom plane of guide-frame
Ctions: Forward and reverse cut ctions
The scale of figure can be selected arbitrarily
14. Machining status display: Cutting figure real time tracing,
Three coordinate display and Parameters of pulse generator display and
Cutting length, time and speed
15. Setup mode of the technical parameters: Program setting, manual input
16. Electric control mode of machine: Auto programming control
17. Short-circuit processing: Auto shot-circuit backspace
18. Wire-break processing: Return to the start point or wire-break
Point andcontinue to cut after thread the wire.
19. Power failure processing: Memorize all status, recoverable machining