| Brand Name: | LZDC |
|---|---|
| Place of Origin: | China (Mainland) |
| Caliber of flow meter: | DN15-DN250 |
| Range of flow: | Liquid:1.0~150000l/h Gas:0.05~3000m3/h |
| Measure Ratio: | 10:1,20:1(special) |
| Medium temperature: | Standard:-30~+120c,high temperature:120~350c |
| Power supply: | 24VDC(12~36VDC) |
| Output signal: | 4~20mADC (two-wire configuration); attached HART Protocol allowed |
| Environmental temperature: | Local type:-40~120 Remote-control type:-30~60 |
| Cable interface: | M20*1.5 |
| Storage requirement: | Temperature:-40~85c humidity:85% |
| Precision: | Grade 0.5, Grade 1.0 (special) |
Quick Details
Specifications
Application
Over the years, with its excellent property and reliability as well as preferable cost performance, the metal tube float flowmeter
has been applied widely in a variety of industries, such as the petrochemical engineering, iron and steel, electric power, metallurgy, light industry, food, pharmacy, water treatment, etc.
Technical parameters
|
Item |
Parameters |
|
Caliber of flow meter |
DN15-DN250 |
|
Range of flow |
Liquid:1.0~150000l/h Gas:0.05~3000m3/h |
|
Measure Ratio |
10:1,20:1(special) |
|
Precision |
Grade 0.5, Grade 1.0 (special) |
|
Pressure rating |
DN15,DN25,DN50:4.0MPa(Max: 20MPa) DN80,DN100,DN150:1.6MPa (DN80:Max 10MPa;DN100:Max 6.4MPa;DN150:Max 4.0MPa) |
|
Medium temperature |
Standard:-30℃~+120℃,high temperature:120℃~350℃ |
|
Power supply |
24VDC(12~36VDC) |
|
Output signal |
4~20mADC (two-wire configuration); attached HART Protocol allowed |
|
Output load |
500Ω(24V power supply) |
|
Environmental temperature |
Local type:-40℃~120℃ Remote-control type:-30℃~60℃ |
|
Storage requirement |
Temperature:-40℃~85℃ humidity:≤85% |
|
Connection mode |
Flange connecting. Flange standard :GB/T9119-2000; User's appointment allowed |
|
Cable interface |
M20×1.5 |
|
Housing protection grade |
IP65 |
|
Mark of explosion-proof |
Intrinsic safety type:ExiaIICT6, explosion-proof type:ExdIICT6 |
|
Pressure loss |
See table of flow for detailed information |
|
Viscosity of medium |
DN15:η<5mPa.s DN25:η<250mPa.s DN50~DN150:η<300mPa.s |
|
Contact material |
R1:304,1Cr18Ni9Ti; Ro:316,0Cr18Ni12Mo2Ti; RL:316L,00Cr17Ni14Mo2Ti; Ti:Titanium alloy; Rp:PTFE lining |