1  32-digit high performance industrial level ARM controller.

2  Precise set of the speed signal with the sound and comfortable elevator travel.

3  It can be applied analog signal, digital signal output according to the actual site situations.

4  It is more thoroughly guaranteed the security by adopting the double-CPU structure.

5  CAN bus communication mode is used strongly to prevent anti-interference.

6  Intelligent group control system assigned all the elevators to run efficiently so as to highly conserves the energy.

7  The permanent magnet synchronous technology is applied to save about 30% of the energy than the traditional one.

8  The small drive unit being adopted conserves space.

9  The new traction machine is so convenient to use for it' s maintenance-free.

ICP-001

Ceiling

Type: ICPC001

Material: Hairline stainless steel

sheet with acrylic transmittance plate

Light type: LED light.

Walls

Front: Stainless steel sheet with short hairline.

Side: Hairline stainless steel sheet. Rear: Hairline stainless steel sheet and Mirror stainless steel.

Skirting

Hairline stainless steel sheet.

Floor

Deep red color carpet.

Handrail

ICPH-002, Hairline stainless steel, tube, rear side.

Mirror

None.

Car operating panel

ICPP-001, Hairline stainless steel panel, Black background color LCD display, quadrate button.

	BASIC FUNCTIONS
No.	Name	Descriptions	Standard	Optional
1	VVVF Drive	Motor rotation speed can be precisely adjusted to get smoothv and stable speed curve in elevator start, run and stop, and gain perfect performance and comfort.	●
2	VWF Door Operator	Motor rotation speed can be precisely adjusted to get a more gentle and sensitive door opening or closing.	●
3	Centralized control for special floors	This function preferentially assigns an elevator to the special floor.	●
4	Service floor selection	Allows the operator to select the service and non-service floors using, for example, set the datas in the control panel.	●
5	VIP service	When welcoming or sending off important guests, this function permits an elevator to be summoned directly to the desired car call floor by pushing a specially provided hall button.	●
6	Closest car priority service	When a hall call button is pressed, the elevator car in the shaft closest to the hall call floor is preferentially dispatched.	●
7	Scheduled  reservation  system	Allows the operator to schedule various elevator services in the building, including the reassignment of service floors, centralized service and priority service, at specific date and time.	●
8	Zoning express service	Starts a divided express service when the peak traffic demand takes place in the preset time zones.	●
No.	Name	Descriptions	Standard	Optional
9	Independent  automatic  operation	This operation allows an elevator to be separated from the group supervisory control and operate independently by a separate hall button.	●
10	Automatic return function	After all the calls have been served, the elevator will return to the start floor for stand-by.	●
11	Running status indications	The control panel can display the information of moving direction, arrival floor, door opening or closing, faults, etc.	●
12	Floor selected in machine room	By operating on the control panel in the machine room, car call can be assigned.	●
13	None stop floor setting	None stop sets according to requirements.	●
14	Base floor setting	Any floor can be set as the base floor.	●
15	Shaft data memory	Through initializing running, the controller can learn and remember the shaft data and these will form the basic data to run with fast speed.	●
	SAFETY FUNCTIONS
No.	Name	Descriptions	Standard	Optional
1	Automatic bypass operation	In the event that the elevator is fully loaded, this operation will not respond to any hall calls and will only respond to the car calls.	●
2	Automatic door open time adjustment	The duration of the door open timing is tailored to usage conditions, substantially improving operational efficiency.	●
3	Door re-open at current floor	When door is closing, door can be re-opened by pushing landing call button at current floor.	●
4	Instant door close	When door is completely opened, by pushing the door close button, door will close instantly.	●
5	Door open prolong button	In the event that this button on the car operation board is pressed, the elevator doors remain open for a pre-set period of time.		●
6	Arrival signal	An electronic chime(located at the top of the car) will be sound just before the arrival of the elevator.	●
7	Floor deselect function	This function allows passenger to cancel the selection of a floor which is accidentally pressed by pressing the button again.(This thus eliminates unnecessary stops.)	●