1  32-digit high performance industrial level ARM controller.

2  Precise set of the speed signal with the sound and comfortable elevator travel.

3  It can be applied analog signal, digital signal output according to the actual site situations.

4  It is more thoroughly guaranteed the security by adopting the double-CPU structure.

5  CAN bus communication mode is used strongly to prevent anti-interference.

6  Intelligent group control system assigned all the elevators to run efficiently so as to highly conserves the energy.

7  The permanent magnet synchronous technology is applied to save about 30% of the energy than the traditional one.

8  The small drive unit being adopted conserves space.

9  The new traction machine is so convenient to use for it' s maintenance-free.

 

ICP-002

Ceiling

Type: ICPC001

Material: Hairline stainless steel sheet with acrylic transmittance plate

Light type: LED light.

Walls

Front: Stainless steel sheet with short hairline.

Side: Hairline stainless steel sheet. Rear: Mirror stainless steel sheet and Hairline stainless steel.

Skirting

Hairline stainless steel sheet.

Floor

Dark green color carpet.

Handrail

ICPH-002, Hairline stainless steel, tube, rear side.

Mirror

None.

Car operating panel

ICPP-001, Hairline stainless steel panel, Black background color LCD display, quadrate button.

	OPERATING SYSTEMS
No.	Name	Descriptions	Standard	Optional
1	Simplex collective control	This is fully automatic operation used for a single elevator system. Hall calls in the direction in which the elevator is traveling are responded to sequentially and when all calls in that direction are cleared, calls in the opposite direction are responded to. When there are no more calls, the elevator will stop at the last floor served.	●
2	Duplex collective control	This is fully automatic operation used for a two-elevator system.Hall calls are responded to by whichever elevator that can serve the hall call faster. When there are no more calls, one of the elevators will stand-by at the start floor while the other elevator will stay at the last floor served.		●
3	Group control	This is a group control system used to operate three to eight elevators in a large-sized building. This control system is in charge of the registration and assignment of the instructions from hall calls and car calls by a control module. All the calls are assigned according to the least time to wait, and this function will fully put all the elevators to good use by theirs transportation ability, so that all the elevators will get high efficiency.		●
4	Attendent  operation	For this system, the stop floor is manually set by an attendant,such as in a department store.		●
5	Independent  operation	This operation system is used when there is a need to serve special passengers. Under this operation, all hall calls are disabled for the elevator and it is reserved for exclusive use of the special passengers.		●
	BASIC FUNCTIONS
No.	Name	Descriptions	Standard	Optional
1	VVVF Drive	Motor rotation speed can be precisely adjusted to get smoothv and stable speed curve in elevator start, run and stop, and gain perfect performance and comfort.	●
2	VWF Door Operator	Motor rotation speed can be precisely adjusted to get a more gentle and sensitive door opening or closing.	●
3	Centralized control for special floors	This function preferentially assigns an elevator to the special floor.	●
4	Service floor selection	Allows the operator to select the service and non-service floors using, for example, set the datas in the control panel.	●
5	VIP service	When welcoming or sending off important guests, this function permits an elevator to be summoned directly to the desired car call floor by pushing a specially provided hall button.	●
6	Closest car priority service	When a hall call button is pressed, the elevator car in the shaft closest to the hall call floor is preferentially dispatched.	●
7	Scheduled  reservation  system	Allows the operator to schedule various elevator services in the building, including the reassignment of service floors, centralized service and priority service, at specific date and time.	●
8	Zoning express service	Starts a divided express service when the peak traffic demand takes place in the preset time zones.	●
No.	Name	Descriptions	Standard	Optional
9	Independent  automatic  operation	This operation allows an elevator to be separated from the group supervisory control and operate independently by a separate hall button.	●
10	Automatic return function	After all the calls have been served, the elevator will return to the start floor for stand-by.	●
11	Running status indications	The control panel can display the information of moving direction, arrival floor, door opening or closing, faults, etc.	●
12	Floor selected in machine room	By operating on the control panel in the machine room, car call can be assigned.	●
13	None stop floor setting	None stop sets according to requirements.	●
14	Base floor setting	Any floor can be set as the base floor.	●
15	Shaft data memory	Through initializing running, the controller can learn and remember the shaft data and these will form the basic data to run with fast speed.	●