Design Standards

BS EN 13355: 2004 + A1: 2009

BS EN 60204: 2006 + A1: 2009

BOOTH DIMENSION

The internal dimension

6900 X 4000 X 2800mm (L X WX H)

The external dimension

7010 X 5570 X 3610mm (L X W X H)

BASE

Base design

Galvanized sheet bending forming, the full grid

Floor height 350mm and can not adjustable

The carrying capacity of the grid

650kg / single round

Filter area

27m²

Drive-in-ramp

2 pieces; Size: 2000X 1030X 320, diamond structure

Grid description

Size:997X 756mm, 40X3mm, pressed steel grating grille instead of the traditional twisted steel for the rail steel grating. The most important feature of such steel grating are aesthetics, durability, good bearing capacity.

CABIN

Cabin structure

vertical wall plug

Plenum height

400mm

WALL PANEL

Wall panel

50mm wall panel, wallboard filler material:heat-resistant rock wool panel

Top material

F5 class filter cotton, Model SP-600G

Material edging

1.2mm galvanized plate bending forming

DOOR

Door form

manual door, 2 + 1 structure

Door size

3200 X 2700 mm (W X H)

Door arrangement and number

parts of door: 1 set

Door description

filling heat-resistant EPS

WORKING DOOR

Door form

frame structure work

Number of working door

1 set; with safety glass viewing window

SIDE LIGHTING

Quantity and power

6 sets of boxes, each 2 X 36W, 432W total

Lighting arrange way

on both sides

Lighting description

protection class IP55, CE certified electronic rectifier, OSRAM lamp

CEILING LIGHTING

Number and power

8 sets the boxes, each 4X36W, a total of 1152W

Lighting arrange way

on both sides

Lighting description

Protection class IP55, CE certified electronic rectifier, OSRAM lamp

Total light intensity

> 1000Lux

FILTRATION SYSTEM

Pre-filter

G2 grade pre-filter plate filter

Ceiling filter

F5 grade filter cotton, Model SP-600G

Bottom paint mist collecting

fiberglass paint-resistance filters

Exhaust filter

fiberglass paint-resistance filters with large ventilation quantity, small resistance and flame resistance, etc.

INLET/EXHAUST SYSTEM

INLET / exhaust fan

direct-type turbine fan

Inlet / exhaust fan power and motor description

5.5KW, 970 rpm, 380 V, 50 Hz (domestic)

Parameter inlet / ventilator

18,000 m³ / h, 650pa

Equipment empty loaded

+/- 0.18m / load

Noise

<78 db

HEATING SYSTEM

Heat exchanger

Stainless steel 1Gr18Ni9Ti (SUS304)

Heat power

158KW

△ T temperature capability

20° C (from 0°C to 10°C under painting state)

The Max operating temperature

80° C

Heating time

5-8 minutes (from 20°to 60°C under baking state)

Model diesel burner

Burner G20

Pipeline configuration:

Straight:4 pieces; 90°: 1 piece; 45°: 1piece;  reducers: 1piece

A manual throttle exhaust

1 piece

CONTROL SYSTEM

Implementation of standards

started directly

Features

painting, warm painting, baking, lighting, emergency stop switch, failure indication, over-temperature alarm indication

Special Item

Rated power: 15KW