Products:
EP72/EP96 Series Control Circuit Board
EP72/EP96 Series Power Supply Circuit Board
EP72/EP96 Series Drive Circuit Board
Performance:
TOPIEV EP72 / EP96 series low-voltage AC controller is designed for low-voltage vehicle developed motor controller. It uses advanced control algorithms, support for precise control of the AC motor / permanent magnet synchronous motor / brushless DC motor speed or torque mode. Having a high power density, high efficiency, good performance, high reliability, system noise characteristics, and speed tracking fast, responsive, electric vehicles can meet the fast start, acceleration, climbing, frequent starts and stops, four-quadrant operation requirements improve the efficiency of the actual operating conditions within the range of an electric vehicle, the battery still effectively feed surging power output, increasing the battery on a single charge mileage.
Applicable Industries:
The controller is widely used in low-speed electric vehicles, space vehicles, forklifts, electric vehicles, etc.
Product Features:
1. The vector control algorithm with independent intellectual property rights, to achieve precise control of the controller of the motor torque, speed.
2. Frequency range: 0 to 500 Hz.
3. Special low-noise control technology.
4. The drive can be adapted to any type of AC motors, DC motors, permanent magnet synchronous motors.
5. Multiple I / O interfaces, and satisfy the needs of system control.
6. It has a wide operating voltage range and strong output overload.
7. Multiple levels of protection, so that drivers safer.
8. Through rigorous testing to ensure the reliability of the drive to meet the requirements of harsh environments.
9. The electrical contact state detection buffer.
10. DO output short circuit protection.
11. Custom software made for the special needs of different users, to meet the customer's individual requirements.
Design Standards:
1. GB / T 18387-2008 Limits and methods of measurement of electromagnetic radiation intensity electric vehicle
2. GB 14023-2006 "Limits and methods of measurement of radio disturbance characteristics of vehicles, motorboats and spark-ignited engine-driven devices"
3. GB / T 19951-2005 Road vehicles - Test method for generating an electrostatic discharge harassment
4. GB / T 17619-1998 immunity of vehicles to electromagnetic radiation limits and methods of measurement of electrical and electronic components
5. GB / T 17262.5-2008 Electromagnetic compatibility - Testing and measurement techniques - Surge (impact) immunity test
6. GB-T 17626.6-2008 Electromagnetic compatibility - Testing and measurement techniques Immunity to conducted disturbances induced field
7. GB / T 2423.2-2008 Environmental testing for electric and electronic products
8. GB / T 18488-2006 machines and controllers for electric vehicles
9. GB / T 18384-2001 Safety requirements for electric cars
10. ISO 16750-2006 Road vehicle electrical and electronic equipment Environmental conditions and testing
Performance Parameters:
|
The main technical parameters |
|
|
30KVA |
|
|
Rated output current RMS value |
100A |
|
Peak output current RMS value |
550A |
|
Peak current run time (sec) |
1min(According to the actual thermal conditions) |
|
Switching Frequency |
10KHz |
|
Drive maximum efficiency (%) |
≥98% |
|
Input voltage range |
60V ~ 96VDC |
|
Minimum Dimensions |
230*200*110mm |
|
Supported motor types |
Brushless DC/AC asynchronous/synchronous permanent magnet |
|
Supported encoder |
Hall / incremental encoder |
|
Cooling method |
Natural air cooling |
|
Protection class |
IP66 |
|
Ambient temperature |
-20℃~50℃ |
|
Storage temperature |
-40℃~100℃ |
|
Insulation resistance |
≥ 20MΩ |
|
The way of communication |
CAN2.0 |
|
Performance Parameters |
|
|
Speed range |
0 ~ 500Hz |
|
Speed Accuracy |
± 2% |
|
Torque accuracy |
± 5% (Rated torque) |
|
Response time |
< 50mS |
Control Terminal: Tyco776164-1
Other Products:
1.High-performance Inverter
2.High-performance solar PV inverters and special power inverter
3.Asynchronism motor servo drive(the performace is same as Yaskawa)
4.Synchronous motor servo drive(the performace is same as Yaskawa)
5.Injection Machine Servo
6.HMI touch-screen
7.PLC(Programmable Logic Controller)
8.IEV driver electric vehicle HEV bus(72V, 400V, 800V , 5Kw to 120Kw)
9.Elevator Integrated Controller
10.Step Motor Driver
Other Service:
Sofware and Hardware provided
Design and Manufacture provided
Including:
Inverter
Servo Drive
IEV electric Bus Drive
Life Drive
Step Motor
Line Motor Drive
Motion Control
HMI(Human Machine Interface)
PLC
We also provide product development forward or reverse engineering.
ShenZhen TOPATION Automation TECH CO.,LTD.