Multi-storey belt type drying machine is the batch production of the continuous type drying machine, for ventilation drying better sheet, strip, granular materials, a high rate for dehydrated vegetables, catalyst, Chinese herbal medicine and other types of water, and the temperature of the material does not allow materials is particularly suitable; the drier features fast speed, high evaporation intensity, product quality good advantage, the dehydrated cake paste material, the granulation or made of strip can be dried.

Multi-storey belt type drying machine material due to the action of gravity, from the upper network with falling to the lower net belt material stand, favorable and drying, the material is homogeneous, into and out of the feeding end on both ends of the device, feeding is very convenient.

 characteristics:

1, can adjust the air volume, heating temperature, heating rate and residence time in order to obtain the best drying effect;

2 equipment, flexible configuration, continuous feeding, easy to use.

3, multi set, hot air with high. , save energy;

The air intake device 4, unique, the air distribution is more uniform, to ensure consistent product quality.

5, because the material temperature is low, the equipment is not closed, leaving only the import material must be open, dehumidifying effect is good.

1, design:

According to the calculation, the evaporation capacity water evaporation belt dryer in drying temperature of 75~95 DEG C under approximately 5 Kg/m2.h, therefore it must be dryer mesh belt can meet the production requirements with DW. Selection of bandwidth of 1.6 meters, 10 meters long dry period of 1 meters drying machine for drying. Air volume: 45000m3/h, wind speed 1m/s

2, the introduction of equipment:

A, net belt type dryer, the meter has a drying unit, the length of the drying section 6.3m, using 8 mesh stainless steel mesh.

B, net belt type dryer is in the form of flow type drying, hot air passes through the material layer from bottom to top, and the material can be fully contacted to save energy.

C, net belt dryer for a closed belt dryer, which is characterized in that the only feed end and the discharge end open, the rest of the closed, hot air in the equipment in cross flow, low heat loss and the whole production 100mm insulation layer, it can save a large amount of energy.