Electromagnetic flowmeter products can be widely used in chemical, steel, coal, mining, oil exploration, petrochemical, paper, environmental protection, sugar, pharmaceutical, food, irrigation, drainage and port dredging and other fields, can accurately measure a variety of acid, alkali, salt solution, raw water, cooling water, sewage, coal slurry, slurry, mud, water, mud, pulp, syrup, coal water slurry, corn syrup, fiber pulp, grain syrup, lime, hydrogen peroxide, beer, wort black liquor, green liquor and a variety of beverages and other liquid and solid-liquid two-phase fluid conductive body volume flow.

*Features 
Diameter DN6mm-DN2200mm
Nominal pressure <=1.6Mpa,PN6,PN10,PN16,PN25,PN40 to PN420 can optional
Accurancy 0.5%
Repeatability 0.15%
Output siganl 4-20mA/0-10mA/Pulse/OTC
Electrodes 316L,Titanium(Ti),Tantalum(Ta),HC,Monel,Pt-Ir,W
Protection grade IP65,IP68
Power supply
85-260V/AV,20-30V/DC
Conductivity >0.5us/cm
Communication mode RS485,MODBUS,HART
Frequency 45-63HZ
Environment Temp -10°C~60°C
Environment humidity 5%~95%
Power consumpution
<20W
Lining FEP,PTFE,Ne,F46
Sensor material Aluminium Carbon

* Choose The Lining Material 
Lining Material Main Performance Applications
Teflon
1.The most steady material in plastics which is resistable to boiling hydrochloric acid,vitriol aqua fortis as well as strong alkali and organic solvent. 
2.Not be perfect in abrasion resistance.
Strong corrosive mediums such as strong acid and alkali.
PFA Having the same abrasion resistance with PTFE.Having strong ability of load pressure resistance. Applicable in state of load pressure.
F46 1.Have the same abrasion resistance with PTFE.2.Resistable for low abrasion.3.Having strong resistance to load pressure. 1.The same as PTFE. 2.Applicable in mediums of low abrasion.
Neoprene 1.Be of good elasticity,retractility and abrasion resistance.2.Be resistant to low aicd,alkali and salt but not for oxidation mediums. 1.The same as PTFE. 2.Applicable in mediums of low abrasion.

* Choose The Electrode Material 
Electrode Material Applications
Stainless steel (SUS316) Applicable in water,sewage and corrosive mediums.Widely used in industries of petrol,chemistry,carbamide,etc
Hastelloy B(HB) Having strong resistance to hydrochloric acid of any consistance which is below bioling piont.Also resistable against vitriol,phosphate,hydrofluoric acid,organic acid etc which are oxidable acid,alkali and non-oxidable salt.
Hastelloy C(HC) Be resistant to oxidable acid such as nitric acid,mixed acid as well as oxidable salt such as Fe+++,Cu++and sea water
Titanium Applicable in seawater,and kinds of chloride,hypochlorite salt,oxidable acid(including fuming nitric acid),organic acid,alkali etc.Not resistant to a pure reducing acid(such as sulphuric acid,hydrochloric acid)corrosion.But if acid contains antioxidant(such as Fe+++,Cu++)is greatly reduce corrosion.
Tantalum Having strong resistance to corrosive mediums that is similar with glass.Almost applicable in all chemical mediums.Except for hydrofluoric acid,oleum and alkali. 
Platinum-iridium Almost be applicable in all chemical mediums except for aqua fortis,ammonium salt.