Here in Gongyi Forui Machinery Factory in China, we hvee mini trial machines and if your ore samples about 20kgs can be available, we can do a mini ore beneficiation test for you free. We can share the beneficiation/recovery of the alloy with you here.
The silicon manganese alloy is of high density while the density of the waste is lower.So with this difference, the gravity separation will be a great way to separate the alloy out. However, there are many gravity plants with different patterns and standards. As to how to choose the suitable model to get a great beneficiation efficiency, Gongyi Forui Mavchinery Factory has done a lot of trials and finally found jigger is the most suitable machine for the silicon manganese alloy recovery. The jigger is the core plant to recover the alloy for its large treatment capacity, high recovery rate, wide treating size as well as the high efficiency, energy-saving and environment-friendly. To meet the need of the market,
To separate the alloy granularities needs the liberation of the alloy from the slag, which requires the further crushing or the milling of the slag according to the specific situation of slag. If the embedded size is very fine, rod milling or ball milling will be considered while crushing shall be choosed when it comes to the coarse embedded granularities, and high-efficiency crusher or fine crusher can be ok to fulfill the requirement.
In the crushed or milled silica-manganese smelting slag, the alloy granules and the waste are separated or liberated. The silica-manganese alloy granules are of high density while the density of the waste is lower. With this difference, gravity separation will be a great way to separate the alloy out. And the alloy granules can be used for smelting or sold directly while the final waste can be sold to the cement factory or new-type buiding material factory.
The high-efficient machine for this silico-manganese slag is jigger. As kind of gravity separation machine, it works on the basis of the different densities of the mineral and tailings, and the bigger the difference is, the better the efficiency it will be and the larger the treatment capacity will be.
Forui has designed jigger specially for the slag recovery. This jigger can discharge up & down meantimes with its screen working well, larger treatment capacity and higher recovery.
The silicon manganese alloy is of high density while the density of the waste is lower.So with this difference, the gravity separation will be a great way to separate the alloy out. However, there are many gravity plants with different patterns and standards. As to how to choose the suitable model to get a great beneficiation efficiency, Gongyi Forui Mavchinery Factory has done a lot of trials and finally found jigger is the most suitable machine for the silicon manganese alloy recovery. The jigger is the core plant to recover the alloy for its large treatment capacity, high recovery rate, wide treating size as well as the high efficiency, energy-saving and environment-friendly. To meet the need of the market,
To separate the alloy granularities needs the liberation of the alloy from the slag, which requires the further crushing or the milling of the slag according to the specific situation of slag. If the embedded size is very fine, rod milling or ball milling will be considered while crushing shall be choosed when it comes to the coarse embedded granularities, and high-efficiency crusher or fine crusher can be ok to fulfill the requirement.
In the crushed or milled silica-manganese smelting slag, the alloy granules and the waste are separated or liberated. The silica-manganese alloy granules are of high density while the density of the waste is lower. With this difference, gravity separation will be a great way to separate the alloy out. And the alloy granules can be used for smelting or sold directly while the final waste can be sold to the cement factory or new-type buiding material factory.
The high-efficient machine for this silico-manganese slag is jigger. As kind of gravity separation machine, it works on the basis of the different densities of the mineral and tailings, and the bigger the difference is, the better the efficiency it will be and the larger the treatment capacity will be.
Forui has designed jigger specially for the slag recovery. This jigger can discharge up & down meantimes with its screen working well, larger treatment capacity and higher recovery.