The processing project of chromit smelting slag is more and more considered because of its small investment, fast benefit, and small venture. The embedded granules the chromite smelting slag is usually 0-8mm, and the whole slag blocks are about 250-300mm, so two phases of crushing will be needed to crush the slag to be 0-8mm ensuring that the alloy is separated from the slag. And then the crushed slag will be go for jigging to gain pure chromite alloy.

After trial and error, the flow sheet of jigger and shaking table is adopted to gain  a great recovery efficiency. However, the handling capacity of the shaking table is small, and occupyies large area and the shaking table is seldom used. Usually AM30 jigger is used directly. And clients of Forui use jigger of AM30 and LTA1010/2 jigger to work together to separate the alloy blocks of 0-30mm. And this reduces the damage to crusher and recover large alloy blocks as well with the high recovery rate and good separation efficiency.

Loader-hopper-crusher-jigger-dewatering screen is the usual flow sheet and the waste tailings after dewatering can be used to new-type building factories to finish the recycling of the chromite smelting slag.

Gongyi Forui Machinery Factory is a professional manufacturer of kinds of mining beneficiation machines, and the jiggers, vibrating screen, dewatering screen, crushers from Forui is high efficient, energy-saving, and environment-friendly.