Monel 400 alloy Sheet offers tremendous resistance to the variety of corrosive media including non oxidizing solutions, salt and caustic solutions. The alloy is recommended for using at the elevated temperatures in the reducing and oxidizing conditions. It inhibits the stress corrosion cracking.

Monel 400 alloy Sheet attains high strength. It is highly purposeful for using in the sea engineering and freshwater tanks as it offers more resistance than the copper alloys. It causes resistance to pitting corrosion in the fresh and used waters.

Chemical composition of Monel 400 Sheet:

C	Mn	S	Si	Ni	Cu	Fe
0.30	2.00	0.024	0.50	63.0	28.0-34.0	2.50

Bearing strength of Monel 400 Sheet:

Temper	Yield strength, ksi	Ultimate Strength, ksi
Annealed	58.0	145.0
Half-Hard	98.1	166.0
Full-Hard	162.0	211.5

Characteristics of Monel 400 Sheet:

1. Excellent resistance to brackish water, stress corrosion cracking in freshwaters.

2. Intense resistance to de-aerated hydrochloric, hydrofluoric and sulfuric acids

3. Superior resistance to neutral and alkaline salt and chloride induced stress corrosion cracking

4 Tremendous resistance to alkalis and seawater and steam at the elevated temperatures

Manufacture's Objective Comments to Monel 400 Sheet/Plate/Strip:
The Monel 400 sheet offers significant resistance to the extensive range of corrosive conditions as mentioned above but it is not suitable to use in the oxidizing conditions like nitric acid and nitrous acid. It is cheap and has good mechanical character.

 

Applications of Monel 400 sheet:

1.Chemical and hydrocarbon treatment device

2.Gasoline and freshwater tanks

3.Crude petroleum stills and marine operations

4.De-aerating heaters

5.Boiler feed water heaters and other heat exchangers