Patch Cords are used to provide optical connection for fiber optic electronics. The use of the patch cord provides a quick and easy method for routing fiber patches in datacenters, head-ends, cellular hubs and central offices. The patch cord can be used in an interconnect or cross-connect path connecting the incoming fibers to the electronic equipment and providing patching within the fiber paths. Patch Cords include simplex, duplex and Multi-fibers assemblies.

 

Simplex Patch cord

?  Meets Telcordia GR-326 Core and ROHS requirements.

?  The connector could be SC, FC, LC, ST, MU, E2000 etc.

?  The cable could be G652D, G655, G657, OM1, OM2, OM3, OM4 etc.

?  The cable size could be 0.9mm, 1.2mm, 1.6mm, 2.0mm, and 2.8mm

 

Duplex Patch cord

?  Meets Telcordia GR-326 Core and ROHS requirements.

?  The connector could be SC, FC, LC, ST, MU, MTRJ, E2000 etc.

?  The cable could be G652D, G655, G657, OM1, OM2, OM3, OM4 etc.

?  The cable size could be 1.6*3.3, 2.0*4.1, 2.8*5.7

 

Loopback Patch cord

?  Meets Telcordia GR-326 Core and ROHS requirements.

?  The connector could be SC, LC, and MTRJ etc.

?  The cable could be G652D, G655, G657, OM1, OM2, OM3, OM4 etc.

 

Hybrid Patch cord

?  Both simplex and duplex is available too.

?  Meets Telcordia GR-326 Core and ROHS requirements.

?  The connector could be SC, FC, LC, ST, MU, MTRJ, E2000 etc.

?  The cable could be G652D, G655, G657, OM1, OM2, OM3, OM4 etc.

?  The cable size could be all kind of Simplex and Duplex

 

Break-out Patch cord

?  The unit fiber is 2.0 or 2.8 simplex cable.

?  Meets Telcordia GR-326 Core and ROHS requirements.

?  The connector could be SC, FC, LC, ST, MU, E2000 etc.

?  The cable could be G652D, G655, G657, OM1, OM2, OM3, OM4 etc.

?  Fiber count: 4.6.8.12.24.48……

 

Optical Specification

Connector	SC,FC,LC,ST,MU,E2000,MTRJ
Polishing	SM/UPC	MM/PC	SM/APC
Insertion Loss(max)	≤0.30dB	≤0.30dB	≤0.30dB
Return Loss(min)	≥50 dB	≥35 dB	≥60 dB
Tensile Strength	>70N
Durability	<0.20 dB typical  change, 1000 matings
Repeatability	≤0.1dB
Storage , Operating  Temperature [°C]	-40~+85

 

Geometric Specification (only for 3D interferometer tested)

Connector	Connectors	PC End-face	APC End-face
Radius of Curvature	SC/FC/ST	10~25  mm	5~12  mm
	LC/MU	7~25  mm	5~15  mm
Apex Offset		≤50  um
Fiber Spherical Height		+/- 50 nm
Angular Offset		------	8°± 0.2°

?  Clean and Scratch-Free End Face

?  Proportional geometric test is applied to the normal production.

?  100% interferometer check is available under special requirement.

 

Length tolerance:

?  0<L<1m, 0< *L<5cm

?  1<L<10m, 0< *L<10cm

?  10m<L, 0< *L< Lx1%(normal is 10cm)

L: Cable total length. *L: tolerance.