Simplex 0.9/bare fiber Pigtail (color coded available)
It's consists of a connector and a special length of fiber cable. Meets Telcordia GR-326 Core and ROHS requirements.
? The connector could be SC, FC, LC, ST, MU, and E2000etc.
? The cable could beG652D, G655, G657, OM1, OM2, OM3, OM4 etc.
? The cable size could be 0.25,0.9, 2.0, and 2.8
? There are 12 colors for your option.
? Both 250um and 900um is same colored, easy to identify and make right splice.
? Tight buffer, semi-tight buffer. Loose buffer are available
12 fibers/Colored pigtail
It's consists of 12pcs of Simplex pigtail.12pcs is a unit. Meets Telcordia GR-326 Core and ROHS requirements.
? The connector could be SC, FC, LC, ST, MU, and E2000etc.
? The cable could beG652D, G655, G657, OM1, OM2, OM3, OM4 etc.
? The cable size could be 0.25, 0.9,
? There are 12 colors for your option.
? Both 250um and 900um is same colored, easy to identify and make right splice.
? Tight buffer, semi-tight buffer. Loose buffer are available
Distribution (bundle fan-out) pigtail
It's a multi fibers pigtail. The unit fiber is 0.6 or0.9 tight buffer cable. Meets Telcordia GR-326 Core and ROHS requirements.
? The connector could be SC,FC, LC, ST, MU, and E2000etc.
? The cable could be G652D,G655, G657, OM1, OM2, OM3, OM4 etc.
? Fiber count: 4.6.8.12.24.48……
Optical Specification
|
Connector |
SC,FC,LC,ST,MU,E2000 |
||
|
Polishing |
SM/UPC |
MM/PC |
SM/APC |
|
Insertion Loss(max) |
≤0.30dB |
≤0.30dB |
≤0.30dB |
|
Return Loss(min) |
≥50 dB |
≥35 dB |
≥60 dB |
|
Tensile Strength |
>70N |
||
|
Durability |
<0.20 dB typical change, 1000 matings |
||
|
Repeatability |
≤0.1dB |
||
|
Storage , Operating Temperature [°C] |
-40~+85 |
||
Geometric Specification (only for 3D interferometer tested)
|
Connector |
PC End-face |
APC End-face |
|
|
Radius of Curvature |
SC/FC/ST |
10~25 mm |
5~12 mm |
|
LC/MU |
7~25 mm |
5~15 mm |
|
|
Apex Offset |
≤50 um |
||
|
Fiber Spherical Height |
+/- 50 nm |
||
|
Angular Offset |
------ |
8°± 0.2° |
|
? Clean and Scratch-Free End Face
? Proportional geometric test is applied to the normal production.
? 100% interferometer check is available under special requirement.
Length tolerance:
0<L<1m, 0< *L<5cm
1<L<10m, 0< *L<10cm
10m<L, 0< *L< Lx1%(normal is 10cm)
L:cable total length.
*L:tolerance.