| Model Number: | T7-WLT1-MOST |
|---|---|
| Brand Name: | MiyeaEye |
| Place of Origin: | China (Mainland) |
| Display: | 7 inch TFT-LCD,800*600 resolution |
| SDI digital video level: | 1 channel SDI HD Video IN,1 channel BNC Video OUT |
| Digital Multimeter: | yes |
| Visual fault locator: | yes |
| SDI image test: | yes |
| TDR cable breakpoint: | yes |
Quick Details
Specifications
7 inch multi-functional HD SDI Tester
with digital multimeter/optical power meter/TDR test function
|
Model |
T7-WLT1-MOST |
||||
|
SDI digital Video Signal **(Optional) |
|||||
|
Video IN/OUT |
1 channel SDI IN BNC& 1 channel Output |
||||
|
HDMI digital Video Signal **(Optional) |
|||||
|
digital Signal in |
1 channel HDMI in,support 1080P,720P |
||||
|
Video Test |
|||||
|
Signal mode |
NTSC/PAL (Auto adapt) |
||||
|
Video Output Mode |
1.0 Vp-p |
||||
|
Display |
7inch TFT-LCD, 800(RGB)×600 resolution |
||||
|
LCD adjustment |
Brightness, Contrast, Saturation adjustable |
||||
|
Video IN/OUT |
1 channel BNC Input & 1 channel Output |
||||
|
VGA input display |
|||||
|
VGA input display |
Receive DVR,NVR VGA signal |
||||
|
Video Level test |
|||||
|
Level test |
Video signals measured in IRE or mV |
||||
|
Video Level meter |
|||||
|
Video Level meter |
PEAK video signal level, SYNC signal level, COLOR BURST chroma level measurement |
||||
|
DC12V 2A power output |
|||||
|
DC12V power output |
Output DC12V/2A power for camera |
||||
|
5V power output |
|||||
|
Power output |
Output 5V power for phone as power bank |
||||
|
Audio input test |
|||||
|
Audio input test |
test the pickup and other audio equipments on the front-end |
||||
|
PTZ controller |
|||||
|
Communication |
Support RS232 and RS485 |
||||
|
PTZ Protocol |
Compatible with more than 30 protocols such as PELCO-D/P, Samsung, Panasonic, Lilin, Yaan, etc. |
||||
|
Baud Rate |
600,1200,2400,4800,9600,19200,57600,115200bps |
||||
|
Video Signal Generation |
|||||
|
Color bar generator |
Output one channel PAL/NTSC color bar video signal for testing monitor or video cable.(red, green ,blue, white and black color ) |
||||
|
UTP Cable tester |
|||||
|
UTP cable test |
Test UTP cable connection status and display in the screen. Read the number of the test box. |
||||
|
RS485 /232data analysis |
|||||
|
Data Monitor |
Captures and analyzes the command data from controlling device |
||||
|
10x Zoom Image |
|||||
|
Image 10x zoom |
10x zoom image display and video out |
||||
|
Photograph,Video record, Record playback |
|||||
|
Photograph |
snapshot and save the current image as JPG file |
||||
|
Video record |
Video record and storage the file |
||||
|
Record playback |
To view the storage file in the SD card |
||||
|
Port flicker |
|||||
|
Port flicker |
Find the connected POE port quickly. |
||||
|
IP scan,Link monitor,PING test |
|||||
|
IP scan |
Find out the connected IP camera or the other network equipment IP address quickly. |
||||
|
Link monitor |
Check the IP address whether is occupied |
||||
|
PING testing |
Test IP camera or Ethernet port of the other network equipment whether work normally, and check the IP address |
||||
|
PoE test |
|||||
|
PoE test |
Display the power supply voltage and cable connection states |
||||
|
Digital Multimeter*(Optional) |
|||||
|
Optical power meter **(Optional) |
|||||
|
Calibrated Wavelength(nm) |
850/1300/1310/1490/1550/1625nm |
||||
|
Power range(dBm) |
-70~+10dBm |
||||
|
Sensitivity(nW) |
0.001nW |
||||
|
Connector type |
FC/PC |
||||
|
Data hold |
Hold and display the measured value |
||||
|
Relative measurement |
Display the relative power value |
||||
|
Visual fault locator **(Optional) |
|||||
|
Visual fault locator |
Test fiber's bending and breakage ( SM and MM fiber) |
||||
|
TDR Test**(Optional) |
|||||
|
TDR Test |
Cable length and short circuit measurement(BNC cable, telephone cable) |
||||
| Model(s) in option | Description |
|
T7-WLT1 (Basic Model) test analog camera only |
Video IN/OUT:1 channel SDI IN BNC& 1 channel Output |
| digital Signal in:1 channel HDMI in, support 1080P,720P | |
| Signal mode:NTSC/PAL (Auto adaptable) | |
| Video Output Mode;1.0 Vp-p | |
| Display:7 inch TFT-LCD, 800(RGB)×600 resolution | |
| LCD adjustment:Brightness, Contrast, Saturation adjustable | |
| Video IN/OUT:1 channel BNC Input & 1 channel Output | |
| VGA input display:Receive DVR, NVR VGA signal | |
| Video Level test:Video signals measured in IRE or mV | |
| Based on T7-WLT1 all this series with Cable search function. | |
| T7-WLT1-S | with SDI image test |
| T7-WLT1-SM | with Digital multimeter |
| T7-WLT1-SO |
with Optical power meter |
| T7-WLT1-SV |
with Visual fault locator |
| T7-WLT1-ST | with TDR cable breakpoint |
| T7-WLT1-MOST |
with Digital multimeter+Optical power meter+ SDI image test+TDR cable breakpoint |
| T7-WLT1-MVST |
with Digital multimeter+Visual fault locator+SDI image test+TDR cable breakpoint |