| Type: | Soldering Machine |
|---|---|
| After-sales Service Provided: | Engineers available to service machinery overseas |
| Usage: | solder |
| Voltage: | 380V |
| Brand Name: | SIMT |
| Place of Origin: | China (Mainland) |
| Condition: | New |
Quick Details
Specifications
Characteristics of the equipment
1. open canopy-style streamlined shell design, beautiful appearance, easy to clean.
2.The soldering furnace using titanium alloy materials. High strength and high hardness of special aluminum alloy guide rail, long service life.
3. Using PC and Professional PLC control technology to ensure system reliability and stability.
4. Rodless cylinder spray device that can automatically adjust the width with PCB, effective saving flux.
5. Crest tin stove adopts stepless electronic frequency control, can independently control the wave height.
6. The isolated device, flux fumes from the dedicated exhaust channel and dedicated recycling channel discharge, to meet environmental requirements.
7.The user can set Automatic Switcher machine date, time, temperature and other parameters yourself.
8.Be equipped with cooling module and temperature compensation module, suitable for and a variety of process requirements
9. Imported miniature chemical pump, propyl alcohol cleaning agents, automatic cycle cleaning chain claw.
10.Strong preheating system, high heat radiation, rapid heating, modular design for easy cleaning.
11. Three independent preheating, ceramic heating tube device, fully stimulate the flux activity, to obtain good welding results. Radiation heat directly to the bottom of the PCB, heat fast, long life.
12. Titanium alloy die-casting type chain claw, non-stick tin, never deformation, long service life, stable and reliable transport PCB.
13. The entire process transparent observation window for easy observation of the production and maintenance operations
14. Tin stove manual lifting and out, easy to adjust. Use specially design to prevent misuse damage the machine.
15.Transportation system adopts stepless electronic frequency control of motor speed, the PID closed-loop control, transportation speed and stability.
16. Quick call parameters can be stored, manipulated variable setting process consistency in the PCB.
17. When the PCB though automatic spray flux and from wave to minimize the amount of tin oxide.
18. Temperature control system adopts PID closed-loop control method, temperature contorl stable and reliable. With short circuit and over-current protection system.
19. Operating system has a huge memory Windows program that will automate the production and management of records to a higher level.
|
Technical Parameters Of The Equipment |
||
|
PCB width |
50mm-300mm |
|
|
PCB transport height |
750mm±50mm |
|
|
PCB transport speed |
0-2000mm／min |
|
|
PCB transport angle(welding angle) |
3o-7o |
|
|
PCB Transport direction |
L→R or R→L |
|
|
PCB component height restrictions |
100mm |
|
|
The length of the preheating zone |
1600mm |
|
|
preheating zone number |
3 |
|
|
The power of the preheating zone |
6kw |
|
|
The length of the preheating zone |
Can be adjusted by the room temperature to 250 degrees |
|
|
Heating Type |
Infrared heating |
|
|
Number of cooling zone |
2 |
|
|
cooling method |
Compulsory air-cooled |
|
|
Apply solder type |
Lead-free solder or Ordinary solder |
|
|
The power of tin stove |
9kw |
|
|
Furnace capacity |
300KG |
|
|
Tin stove temperature |
From room temperature to 300 degrees., Control accuracy ± 1 ℃ |
|
|
Temperature control mode |
PID+SSR |
|
|
The whole machine control mode |
Computer and Mitsubishi plc |
|
|
Flux capacity |
5.2L |
|
|
Flux Flow |
10ml-100ml/min |
|
|
Spray method |
Japanese SMC rodless cylinder and Taiwan QiBao nozzle |
|
|
power supply |
3-phase 5-wire 380V |
|
|
Starting power |
19kw |
|
|
rated power |
3.0kw |
|
|
Air pressure |
4~7KG/CM2 |
|
|
The size of the rack |
L3100*W120*H1650MM |
|
|
Installation dimensions |
L3880*W1300*H1650MM |
|
|
Weight |
700kg |
|
|
Preheating System |
||
|
Preheat zone extended |
1600mm/3 independent temperature control, long preheating zone, can provide a wide range of adequate warm-up room for adjustment, can eliminate undesirable large components on PCB soldering phenomenon, Three elongated preheating, reduce PCB board several attacks, PCB board heated evenly, can improve production efficiency. |
|
|
Temperature control |
Mitsubishi temperature acquisition module, PID temperature control is accurate, reliable, imported thermocouple test system, do a thermocouple exception alarm function |
|
|
Heating section |
Ceramic heater, fast heat, long life, low thermal inertia; 316 stainless steel bottom heat directly radiated PCB, uniform temperature zones, each zone temperature complementary, no groove phenomenon. |
|
|
Preheat power |
9kw |
|
|
Transportation Systems |
||
|
Rail Material |
SIMT special high temperature resistant aluminum rail. Stainless steel rails using a special thermal compensation, anti-deformation telescopic structure to ensure that no deformation can not afford to board rail |
|
|
Rail Precision |
Three synchronized rail width adjustment means, worm, worm precision screw-width-modulated, accuracy within 0.2mm width adjustment, the three support rails make consistent parallel and consistent length, the entire rail mounting. |
|
|
Width-modulated mode |
Width adjustment manually |
|
|
Transport speed |
100 -2000mm/min |
|
|
C / V speed deviation range |
Electronic closed-loop control precision within 0 to 10 mm / min |
|
|
Motor Transport |
Taiwan STK 90W inverter motor, belt force limiters overload protection device |
|
|
Tin stove System |
||
|
Tin stove material |
3MM thick titanium alloy material, high temperature resistance, corrosion resistance, adapt to lead-free technology, long life; |
|
|
Tin stove advantage |
Special structure wettability spout, the way to progress into the furnace (traditional for the next way into the tin), reduce solder oxidation, easy to maintain, does not produce a floating black powder tin slag; tin furnace capacity 300kg |
|
|
Low oxidation design |
High strength tin stoves, high thermal stability, the use of liquid tin-flow design principles, reduce the impact of tin oxide because caused by continuous work 8 hours oxide slag is minimal. Lead solder 2.0kg / 8H, lead-free solder 1.8kg / 8H. Tin tin slag containing impurities different about bias. Applicable Sn / Ag / Cu, Sn / Zn, Sn / Cu lead-free solder |
|
|
Tin stove moving way |
Manually |
|
|
Tin wave height adjustable |
0-12MM |
|
|
Heating system |
The United States cast Watt heating plate, long service life. External heating system, using upper and lower heating furnace heating, more accurately, not burst tin! Maintenance very convenient. |
|
|
After-sales Service |
||
|
Installation, training, consulting services |
Free installation, free production technology training, free technical training |
|
|
Warranty time |
2 years SIMT all products to all customers |
|
|
Warranty time outside |
Lifetime maintenance (paid service), charge only the cost of materials and labor costs. |
|