| Type: | Steel Frame & Purlin Machine |
|---|---|
| After-sales Service Provided: | Engineers available to service machinery overseas |
| Warranty: | 2 years |
| Certification: | ISO,CE |
| Weight: | 12T |
| Dimension(L*W*H): | 11MX1.5M |
| Power(W): | 11KW |
| Voltage: | 380V |
| Place of Origin: | China (Mainland) |
| Condition: | New |
Quick Details
Specifications
The thickness of sheet:1.0mm---3.0mm cold rolled or galvanized steel .G250Mpa
Standard Specification:
The structure of equipment
1 5 T hydraulic decoiler ?
Single head decoiler ,hydraulic inner expansion ?
Coil weight (Max):5000kg ?
Coil dia (Max):1600mm ?
Coil Width(Max.):500mm
2, feeding, leveling ?
Feeding can be adjustable on the right and left ?
feeding roller, dia is ￠80mm,material 45# steel, quenched 48°-52°, chromated ?
7 rolls leveling,(three upper rolls and four lower rolls )quenched and chromed
3, punching ?
hydraulic punching ?
working pressure:20mpa ?
mould material: Cr12 quenched 58°-62° ?
hydraulic power:7.5 kw
4,roll forming machine ?
Machine structure: heavy-duty stands tower,forged steel ?
main motor power: 45kw ?
Decelerating motor: , JZQ-650,made in Shanghai or Changzhou ?
drive: joint coupling drive( gearbox for each roller station see picture below) ?
main shaft dia: ￠80mm material: 45﹟forge steel ?
roller material: GCR15 quenched HRC58°-62° ?
roll station:13stations plus 7 rolls leveling,2 rolls for feeding ?
Working speedr:12--15m/min(not including punching) ?
Transducer: Panasonic made in Japan. 380V 50HZ ?
Way of control: PLC,Panasonic made in Japan ?
Yaskawa/Panasonic Inverter control,made in Japan ?
Computer operating panel: touching screen
5, Hydraulic flying cutting ?
hydraulic shearing cutting ?
blade material: Cr12Mov,quenched 58°-62° ?
oil cylinder dia:160mm ?
working pressure:20mpa
6, the Outside size: ?
18m long*2.2m wide*1.5m high
7, Run out table ?
Jointed by 60mm*40mm tube (can be adjusted to up and down) ?
Gliding wheel fixed on the shelves ?
size:1.5mlong*0.8mwide*0.6-1mhigh(can be adjusted) The components of the whole line ?
5T hydraulic decoiler, roll forming Machine ( feeding, levelling and guiding) 2 sets of holes punching units PLC cabinet, Hydraulic station, hydraulic cutting unit,1simple runout tables,16 sets of cutting blades.
The equipment flowchart:
5T hydrarlic Decoiler—Feeding—leveling—holes punching----roll forming----hydraulic cutting—simple outables
Standard Specification:
The structure of equipment
1 5 T hydraulic decoiler ?
Single head decoiler ,hydraulic inner expansion ?
Coil weight (Max):5000kg ?
Coil dia (Max):1600mm ?
Coil Width(Max.):500mm
2, feeding, leveling ?
Feeding can be adjustable on the right and left ?
feeding roller, dia is ￠80mm,material 45# steel, quenched 48°-52°, chromated ?
7 rolls leveling,(three upper rolls and four lower rolls )quenched and chromed
3, punching ?
hydraulic punching ?
working pressure:20mpa ?
mould material: Cr12 quenched 58°-62° ?
hydraulic power:7.5 kw
4,roll forming machine ?
Machine structure: heavy-duty stands tower,forged steel ?
main motor power: 45kw ?
Decelerating motor: , JZQ-650,made in Shanghai or Changzhou ?
drive: joint coupling drive( gearbox for each roller station see picture below) ?
main shaft dia: ￠80mm material: 45﹟forge steel ?
roller material: GCR15 quenched HRC58°-62° ?
roll station:13stations plus 7 rolls leveling,2 rolls for feeding ?
Working speedr:12--15m/min(not including punching) ?
Transducer: Panasonic made in Japan. 380V 50HZ ?
Way of control: PLC,Panasonic made in Japan ?
Yaskawa/Panasonic Inverter control,made in Japan ?
Computer operating panel: touching screen
5, Hydraulic flying cutting ?
hydraulic shearing cutting ?
blade material: Cr12Mov,quenched 58°-62° ?
oil cylinder dia:160mm ?
working pressure:20mpa
6, the Outside size: ?
18m long*2.2m wide*1.5m high
7, Run out table ?
Jointed by 60mm*40mm tube (can be adjusted to up and down) ?
Gliding wheel fixed on the shelves ?
size:1.5mlong*0.8mwide*0.6-1mhigh(can be adjusted) The components of the whole line ?
5T hydraulic decoiler, roll forming Machine ( feeding, levelling and guiding) 2 sets of holes punching units PLC cabinet, Hydraulic station, hydraulic cutting unit,1simple runout tables,16 sets of cutting blades.
The equipment flowchart:
5T hydrarlic Decoiler—Feeding—leveling—holes punching----roll forming----hydraulic cutting—simple outables
|
MODEL |
D(mm) |
B(mm) |
L(mm) |
T(mm) |
|
C10010 |
102 |
51 |
12.5 |
1.0 |
|
C10012 |
102 |
51 |
12.5 |
1.2 |
|
C10015 |
102 |
51 |
13.5 |
1.5 |
|
C10015 |
102 |
51 |
14.5 |
1.9 |
|
C15012 |
152 |
64 |
14.5 |
1.2 |
|
C15015 |
152 |
64 |
15.5 |
1.5 |
|
C15019 |
152 |
64 |
16.5 |
1.9 |
|
C15024 |
152 |
64 |
18.5 |
2.4 |
|
C20015 |
203 |
76 |
15.5 |
1.5 |
|
C20019 |
203 |
76 |
19 |
1.9 |
|
C20024 |
203 |
76 |
21 |
2.4 |
|
C25019 |
254 |
76 |
18 |
1.9 |
|
C25024 |
254 |
76 |
20.5 |
2.4 |
|
C30024 |
300 |
96 |
27.5 |
2.4 |
|
C30030 |
300 |
96 |
31.5 |
3.0 |
|
C35030 |
350 |
125 |
30 |
3.0 |