With lower mold can slid out towards operation direction, inserts, placed parts and finished products are all finished outside the clamping unit. It works safely and suits for those inserts that are hard to place.

Suitable for all kinds of insert molding.
Nitrided steel screw and barrel, directly driven by high torque motor, with multi stages injection pressure, better plasticization.
Vertical compression clamping system, closing mold with high speed lower pressure as well as multi pressure control and prolong mold using life.
Electric protection device can not happen wrong action and maintain the operators safety.
Auto life injection base, it is easy for replacement of material and mold.
Vertical Plastic Injection Molding Machine.
Clamping force 15 ton to 300 ton. 
Screw diameter 20 mm to 80 mm. 
Pump motor power from 4.0 kW to 37 kW. 
Heat capacity from 2.7 kW to 14.3 kW.

Product Specification/Models
Model JTT-550D 
Screw Diameter mm 30 35 40
Injection Pressure kg/cm2 2170 1594 1220
Theoretical Shot Volume cm3 99 135 176
Max Shot Weight g/oz 90/3.2 123/4.3 160/5.7
Injection Rate cm3/sec 51 69 90
Screw Stroke mm 140
Screw Speed rpm 0-175
Nozzle Contact Force tons 2.6
Nozzle Stroke mm 200
Number of Temperature Control - 3
Hopper Capacity L 30
Clamping Force tons 55
Opening Force tons 13.5
Platen Size mm 650x490
Distance Between Tie Bar mm 500x340
Min Mold Height mm 260/200
Opening Stroke mm 200
Max Open Daylight mm 460/400
Ejector Force tons 1.3/2.1
Ejector Stroke mm 45/145
Slide Stroke mm 500
Max Mold Weight kg 150
Station Clearance mm ±0.02
Max Hydraulic Pressure kg/cm2 140
Pump Output L/min 47
Oil Reservior Capacity L 150
Cooling Water Consumption /hr 800-1000
Pump Moter Power KW 7.5
Barrel Heating Power kw 4.5
Total Power kw 12
Machine Weight tons 2.1/2.3/2.5
Machine Dimension m 2.0*1.20*2.69
2.0*1.865*2.69
Shipping Weight tons 2.3/2.5/2.7
Shipping Measurement m 2.1*1.30*2.79
2.1*1.965*2.79