Two lower molds can change the position with each other by right-angle. One mold for forming the parts, one mold for fetching the parts. With high safety and the work efficiency can be improved by 30% to 50%.

Suitable for all kinds of insert molding.
Nitrided steel screw and barrel, directly driven by high torque motor, with multi stages injection pressure, better plasticization.
Vertical compression clamping system, closing mold with high speed lower pressure as well as multi pressure control and prolong mold using life.
Electric protection device can not happen wrong action and maintain the operators safety.
Auto life injection base, it is easy for replacement of material and mold.
Vertical Plastic Injection Molding Machine.
Clamping force 15 ton to 300 ton. 
Screw diameter 20 mm to 80 mm. 
Pump motor power from 4.0 kW to 37 kW. 
Heat capacity from 2.7 kW to 14.3 kW.

Product Specification/Models
Model JTT-850DM 
Screw Diameter mm 35 40 45 50
Injection Pressure kg/cm2 2171 1663 1314 1064
Theoretical Shot Volume cm3 135 176 223 275
Max Shot Weight g/oz 123/4.3 160/5.7 203/7.2 250/8.9
Injection Rate cm3/sec 82 107 135 167
Screw Stroke mm 140
Screw Speed rpm 0-200
Nozzle Contact Force tons 2.9
Nozzle Stroke mm 220
Number of Temperature Control - 4
Hopper Capacity L 30
Clamping Force tons 85
Opening Force tons 10.5
Platen Size mm 740x500
Distance Between Tie Bar mm 560x320
Min Mold Height mm 250/200
Opening Stroke mm 250
Max Open Daylight mm 500/450
Ejector Force tons 3.3/3.5
Ejector Stroke mm 75/145
Slide Stroke mm 500
Max Mold Weight kg 200
Station Clearance mm ±0.02
Max Hydraulic Pressure kg/cm2 140
Pump Output L/min 76
Oil Reservior Capacity L 180
Cooling Water Consumption /hr 1200-1500
Pump Moter Power KW 11
Barrel Heating Power kw 5.6
Total Power kw 16.6
Machine Weight tons 4.5/4.8/5
Machine Dimension m 2.31*1.30*3.01
1.796*2.362*3.01
Shipping Weight tons 4.7/5.0/5.2
Shipping Measurement m 2.41*1.40*3.11
1.90*2.47*3.11