Type: | Electric Water Heater Parts |
---|---|
Model Number: | SSH-01 |
Brand Name: | Thermal |
Place of Origin: | China (Mainland) |
Outside Diameter: | 4mm~30mm |
Wiring Connection: | Screw Fitting |
Tube Material: | SUS 304, SUS 316 |
Heating Material: | Nichrome Wire Resistance |
Insulation Material: | MgO |
Voltage: | 12V-480V |
Power(W): | 1KW~100KW |
Sample: | Welcomed |
Quick Details
Specifications
Tubular Heater Element
Specification
Characteristics & Properties
- Tube diameter: Φ4mm-Φ30mm
- Tube Material: SS304, SS316, SS321 and NICOLOY800 etc
- Insulation Material: High-purity MgO
- Conductor Material: Ni-Cr or Fe-Cr-Al Resistance Heating Wire
- Wattage density: high/middle/low (5-25w/cm2)
- Lead Connection Option: Crimped or Swaged leads
- Lead wire type: 10" Standard (Teflon/silicone high temperature fiberglass)
Heat intensity |
Not exceeding 30w/cm2 (advisable) |
Power |
Depends on the dimension |
Exhaust extreme (when cold) |
< =0.1mA to 242 v. |
Insulation (when cold) |
5 Min Ohms 500 Watts minimum |
Dielectric strength |
1500v. 1/sec |
Working temperature |
750 Deg C max. |
Length tolerance |
+/-1.5% |
Diameter tolerance |
-0.02 to -0.06 mm |
Cut off connection tolerance |
+/-15 mm |
Power tolerance (w) |
+5 % - 10 % |
Cold areas |
Depends on length and diameter 5-25mm |
Suggested Applications
- Liquid Immersion
- Plastic Molds
- Dies
- Labeling
- Medical Equipment
- Platens
- Packaging Equipment
- Hot Stamping
- Sealing
- Injection Molding
When ordering please specify
1) Type of heater
2)Wattage and voltage
3)Diameter & length of the heater
4)Drawing or sample required for special configuration