Single Component RTV Silicone Glue

1. Hight quality

2. Superior bond strength

3. Easy to use

4. Quick dry

What to bond:
High performance epoxy adhesive is the adhesive for households and industries. Suitable for repairs and welds. Makes superior bond strength. Bonds to all metal, plastic, rubber, wood, ceramic, glass and concrete. Resistant to acid, alkali, oil, solvent and chemicals. Non-flammable, non-shrinking and waterproof. Makes metallic grey finish. Can be filled, grinded and drilled.
 
Application:

1.Surface to be repaired should be clean, dry and free of oil.

2.Pierce ends of tubes using cap. Squeeze equal amount of hardener and resin from each tube and mix thoroughly until a uniform color is achieved. Mix only what you can use immediately.

3.Apply to surface to be repaired. Remove excess epoxy.

4.Sets in 3-5 minutes.

State	Testing project	Testing standards	Units	Testing results
Before curing	Color	---	---	White
	Viscosity	GB/T 10247-2008	25oC,mPa·S	Semi-liquid
	Gravity	GB/T 13354-92	25oC,g/cm3	1.02±0.05
	Surface drying time	GB/T134775-2002	23oC,RH:50%,min	1~10
	Hardness	GB/T 531.1-2008	Shore A	35~45
After curing	Expansion factor	GB/T 20673-2006	μm/(m,oC)	210
	Water absorption	GB/T 8810-2005	24h,25oC,%	0.01~0.02
	Elongation at break	GB/T 528-1998	%	≥100
	Tensile Strength	GB/T 528-1998	MPa	≥1.5
	Sheering strength	GB 6328-86	Mpa- aluminium/ aluminium	≥1.2
	Dielectric strength	GB/T 1693-2007	Kv/mm(25oC)	≥20
	Volume resistance	GB/T 1692-92	(DC500V),Ω· cm	5×1014

Cautions:
1. Mix thoroughly; Apply to at once after mixing, less amount every time.

2. Cover tightly after using, do not confuse the caps.

3. Wash off the additional glue by alcohol before its solidifying.

4. Avoid eyes and skin contact.

5. Keep out of reach of children, guard against to enter into mouth.

Thanks for visiting. Any questions, please feel free to contact us!