| Flux Content: | 2% |
|---|---|
| Application: | PCB,SMT |
| Weight: | 50g,250g,500g,1kg per roll |
| Melting Point: | 225 |
| Diameter: | 1.0mm |
| Material: | Tin |
| Model Number: | bbiensw |
| Brand Name: | BBIEN |
| Place of Origin: | China (Mainland) |
Quick Details
Specifications
For soldering of tin-lead assemblies, there are our cored wires available in the following alloy specifications:Sn30Pb70, Sn20Pb80,Sn10Pb90.
Sn30Pb70, Sn20Pb80 flux core wire RAM Sn10Pb90 are very low residue flux core wire solder designed for no-clean hand soldering applications. The flux core provides sufficient activity to solder successfully to bare copper and other demanding applications.
The unique blend of resin and proprietary non-halide activators provide rapid wetting, while leaving minimal levels of post-soldering residue. This residue is optically clear, soft and easy-to-probe, tack-free and non-corrosive. In some circumstances and over time the residue can have a white milky appearance.
The tin solder wire could be classified as reel packing and tube packing type.
Each can/bottle holds the solder wire is 500g;
Each tube can load the solder wire is 13g/piece
Packing:
Sn30Pb70, Sn20Pb80 flux core wire RAM Sn10Pb90 are very low residue flux core wire solder designed for no-clean hand soldering applications. The flux core provides sufficient activity to solder successfully to bare copper and other demanding applications.
Fully synthetic halide and rosin free, no-clean J-STD-004 ORL0
Drop in replacement for rosin cored solders
Very good tarnish removing properties and high SIR
Clear, hard residues can be safely left on the board
Little spatter and smog, no smell, bright solder joints during soldering.
Little residue and high insulation resistance after soldering, excellent electrical performance, no-clean.
Soldering flux is evenly distributed with good continuity.
Range of application: widely used for manual soldering or automatic iron soldering operations, applicable to repair or the soldering of the electronic elements of electronic products.
Drop in replacement for rosin cored solders
Very good tarnish removing properties and high SIR
Clear, hard residues can be safely left on the board
Little spatter and smog, no smell, bright solder joints during soldering.
Little residue and high insulation resistance after soldering, excellent electrical performance, no-clean.
Soldering flux is evenly distributed with good continuity.
Range of application: widely used for manual soldering or automatic iron soldering operations, applicable to repair or the soldering of the electronic elements of electronic products.
The unique blend of resin and proprietary non-halide activators provide rapid wetting, while leaving minimal levels of post-soldering residue. This residue is optically clear, soft and easy-to-probe, tack-free and non-corrosive. In some circumstances and over time the residue can have a white milky appearance.
| Product Type | Solder wire Sn30/Pb70;Sn20Pb80;Sn10Pb90 |
| Brand | BBIEN |
| Material | Tin-lead alloy, tin lead |
| Composition | Sn,Pb |
| Melt point | 223-280degree |
| Flux content | 2.0% |
| Application | Metal soldering |
| Density (g/m^3) | 8.1 |
| Diameter | 0.5mm, 0.3mm,0.7mm,0.8mm,1.0mm,1.2mm,1.5mm.2.0mm.3.0mm |
| Weight | 1000g/pcs,500g/reel,250g/reel |
| Type | flux core older wire |
| Place of origin | Shenzhen,Dongguan city |
| Certificate | ISO9001 |
| Keyword | Tin lead solder wire |
| Solder wire | |
| Solder |
| Select the diameter of the solder wire, from between 0.01 inch (0.25 mm) to 0.125 inch (3.25 mm). You must heat the metals to melt the solder as quickly as possible. The smaller the diameter of the solder wire, the faster it will melt. But if you choose too small of a diameter, you will not get enough solder on the joint in one pass. If you choose too large, excess heat may damage your components, or you may get a solder blob. |
| Select flux core or no core. All solder joints need flux, which can be applied from a tube, with a brush, from the core of the solder or in any combination, depending on your personal style. But you must apply flux in one manner or another. The style you develop for soldering will determine the best choice for your application, but to be safe, always use a flux core so that you don't forget. |
The tin solder wire could be classified as reel packing and tube packing type.
Each can/bottle holds the solder wire is 500g;
Each tube can load the solder wire is 13g/piece
Packing:
| Specification | core solder wire/solid wire |
| Appearance | Bright alloy appearance |
| Packing |
50g,100g,200g,250g,500g 500g,1kg,2kg per reel/bobbion; 10kg/carton: 30kg/carton Tube packing:13g/tube Size of 10kg carton:36x18x8cm Size of 30kg carton:36x18x26cm |