SMC FRP composite water tanks
    Currently, combined SMC fiber reinforced plastic composite tank is a new type of water tank at the international. It by the overall quality of SMC FRP Tank board assembly.

    SMC mould veneer use of food - grade resin production of molded sheet.By high-temperature, high pressure, mechanical manufacturing processes, manufacturing method of a mechanical pressing. Use the method of mechanical pressing. Increase the Intensity of earthquake resistance and shock,overcome the defect of hand lay-up uneven strength. And increase the bearing capacity of water tank, At the same time around the plate no 45degrees and 90degrees of flange.
No use corner connectors whenassembled.More flexible.

FRP Panel Tanks represents a new dimension of toxicity free water storage system. The advance design of with the used of top grade materials with strict quality controls and manufactured by highly trained workforce ensured that the products meet the highest quality of standards.

WHY CHOOSE  FRP PANEL TANKS?

FRP Panel Type Water Storage tanks also known as FRP tanks in some parts of the world are manufactured from Vacuum Forming Process using matched mold method. These method will allowed us to use the material which we called "ISOPHATALIC NPG GELCOAT"

The "GELCOAT" is able to protect  FRP Panel against the glass resin interface, ageing, the effect of moisture and temperature induced stress fatigue so that no fibre prominence occurs.
The "GELCOAT" is one of the material approved by Lloyd Register for marine fabrication and it is also widely used in the fabrication of sanitary items, leisure boats and craft etc.

The Vacuum Forming process with the color which also can allowed ACEON FRP Panel to produce with the color which can attached to the Fibreglass panel surface and fulfill the color of customer requirement.

FRP PANEL TANK

1. Produced to comply with the requirements of accelerated WEATHERING TEST.
2. Truly hygienic even for many years after standard warranty period
3. Excellent surface finishing on both side of the panel
4. Resistance to algae and microbiological growth.
5. No dirt accumulation as no any pinholes detected on the panel surface.
6. Only approved sealing materials are used to ensure a leakage and maintenance free water tank.
7. Excellent FRP panel strength as glass content is above 40%. No filler (Ca Co3) is mixed. Only "E" type of glass fiber is used.
8. Additional internal and external tank bracing and reinforcement is provided to prevent leaking and bursting especially for tank height at 3 & 4 meter height.
9. ACEON panel tank was designated to take up in excess of 6 times the working safety factors.
10. Warranty product up to 10 years.
    

FRP PANEL MATERIAL CHARACTERISTIC

• Specific Gravity: 1.8
• Glass content: more than 40%
• Tensile strength: 1,020kgf/cm (9.996KN/cm)
• Young's modulus: 1.40 x 10 kgf/cm (13.7Gpa)
• Flexural strength: 1,650 kgf/cm (16.17 KN/cm)
• Impact strength: 52.5 kgf/cm (0.515KN/cm)
• Compressive strength: 3010 kgf/cm (29.50 KN/cm)
• Shear strength: 960kgf/cm (9.41KN/cm)
• Thermal expansion: 2.16x10/ C
• Thermal conductivity: 0.15 Kcal/m hr (630 J/ m hr C)
• Coef of overall heat transmission: 5.0 Kcal/m hr (21 KJ/m hr C)
• Water absorption: Less than 0.2%
• Cavity: Less than 2%
• Light transmittance: 0.00%

Steel Footing

Water tank to be installed on a horizontal flat surface beam structure, designed to carry its weight.
The Water tank may be supported on a steel footing from a certain size and up, to ensure leveling.
If the length of tank is longer than 10M, the representative may be contacted for special design consideration.

Steel framework may be formed from either channel or H-beam, in a suitable steel specification, to ensure that each panel of the base of the tank is supported. Steel section, dimension and sizes depend on the water tank height and surface.

For any size and height of tanks, pre-welded steel footing Modules are available upon request and are designed to be loaded in container.

At site, those modules will require simple bolting together in order to form the entire steel base frame.

Steel Tower

Our GRP Panel type water tank can easily be installed on a Steel tower which consists of Truss or lattice type construction in a standard module, prewelded and perforated, and designed to be loaded in container.

At site, those modules will require simple bolting together, to form the required steel tower.

Fiberglass Water Tank

SMC water tank is also called SMC storage tank, FRP/GRP water tank, SMC panel tanks. It is a new type of tank. It is made of high qualified SMC panels. Sheet molding compound (SMC) is a kind of fiberglass reinforced plastic, which is a mixture of unsaturated polyester resin with impregnating augmentation material, filling material and glass fiber. SMC water tank is nontoxic, durable, lightweight, corrosion resistant and good-looking. Meanwhile, it's easy to maintain and long-life. It is widely used in water storage in residential buildings, schools, hotel. SMC water tanks are used both for domestic water as well as medicine and health where needs good water supply quality.

Sectional Water Tank Specifications

1.SMC moulded singal board specifications(If need other specifications we can chatting)
1000x1000mm ,1000x 500mm ,500x 500mm
2.thickness:5mm, 8mm, 10mm ,12mm, 14mm,,16mm ,The thinkness is 5mm signal board is used for water tank cover plate
3.SMC moulded water tank is measure up GB5749-85
4.Capacity: 0.125m3 ~ 5000m3

SMC moulded signal baord specifications

Installation Instructions

1 Based on the first plane leveling cement, on the same plane so that the error should not exceed ± 0.5cm.
Welding channel: channel according to the size of the tank welding good match its size and the tank floor size, channel steel welding complete, the diagonal measurements, error of ± 0.5cm, and all welds to connect uniform row seam line.
2 Install the end state: water tank according to the board printed number and description of the arrangement, the connection of the tank bottom, while between two boards add sealing tape, bolted ￠ 10's. Securely sealed bottom plate, bolt afterburner afterburner to a uniform, one-time can not be too much force, otherwise due to uneven force caused by the split plate phenomenon.
3 Is connected with a fixed angle iron and channel steel base plate, so that the tank housing more firmly fixed on the basis of the channel.
4 Install states: water tank according to the board printed number and description to identify the layers BOND NO tank state body, and previously separate state body assembled with bolts.
5 Install stretch: Stretch inner tank according to the size, number and find internal reinforcement length. Measuring stretch of wire reinforcement plate fastening parts, Indian painting, drilling, on to the wire, tighten to make a flat stretch in balance with the tank housing. If there is a large error between the casing and reinforcement, can be adjusted by adjusting the size of the error bolt tightness, until the error is adjusted to a minimum so far.
6 Install the cover: the final installation of the tank top cover, and even fastening bolts can not force too large or too small. After all the fasteners tank adjusted, according to the drawing hole location, a good all pipes, having a good valve flange for docking.
7 Tanks fully installed, unified inspection, adjustment, test the water does not leak in compliance.

How to correctly use fiberglass tanks?


1. Fiberglass tanks for the storage of drinking water at room temperature and the design and manufacture, please do not store hot water and other liquids (chemicals, oil, etc.)
2. On-site construction: pre-construction, install the stay requested by the foundation. Providing power and construction inspection seal with water.
3. To avoid water tank next to the fire: When welding operations, to take protective measures, not to splash the water tank panels Mars.
4. To prevent contaminants from flowing into the tank from the outside: for the convenience and safety of maintenance and inspection, the tank must leave some space around.
5. The molded fiberglass boards do not touch on the corners, do not beat something with hard tools.
6. In order to prevent expansion of the pipe, shrinkage, partial load and shock, glass steel water tank, outlet pipe must be of rubber around the streets (expansion joints), to take over the additional weight should be supported, not acting on the tank.