LA-210A is a compact module for line array system. Reproduction for low frequency is handled by two 10" woofer speakers. High frequency is assigned to pairs of compression driver, which utilizes two 1.75" compression drivers with titanium diaphragm. The driver is coupled with an acrylic wave adaptor, which allows an even wave performance. The dual phase adaptors design is another unique technology, which leads to high flux density and to enhancement of sound. Pressure. A

Durable painting makes the system suitable for different venues – indoor or outdoor. And provides protection against bump and abrasion during the touring performance. It's also equipped with dolly for easy flying. Integrated hanging hardware provides for splay angles from 0°to 7.5°with an increment of 1.5°, providing a seamless array.

Model	LA-210A
Type	Line array system
Frequency Response	65Hz-20KHz±3dB
Power handling	LF 700W(RMS)1400W(PEAK)
	HF 180W(RMS)360W(PEAK)
Other functions	built-in crossover(LA-210A)
Sensitivity	LF 99dB(1W@1M)
	HF 108dB(1W@1M)
Max@S. P. L	LF 127dB(PEAK/1M)
	HF 127dB(PEAK/1M)
LF section	2×10"(260mm) woofer
	75mm(3in)coil
Nominal impedance	8 ohm
HF section	2x1.75"compression driver with44mm
	titanium diaphragm
Nominal impedance	8 ohm
Output section	2-channel
Dispersion pattern	110o H×9o V
Surface finish	Black paint
Array design	Arrays of less than 3×LA-210A will
	provide poor dispersion control and are
	neither recommended nor supported
Speaker cables	1(+)1(-) 2(+)2(-)
Input connectors	2×NL4MP speakon
Recommend crossover	LF 70Hz-2KHz
	HF 2KHz-20KHz
Dimensions	546×291×410mm(W×H×D)
Package dimensions	610×360×480mm/0.11cbm
Enclosure	Birch Plywood
Gross weight	35kg

Company introduction

T. I Reward Audio CO., LTD is a global designer, manufacturer and distributor of high quality pro audio equipment, our production line including indoor outdoor line array speaker, pa speaker, pro subwoofer, monitor speaker, power amplifier, processor and wireless microphones. OEM and customized service is well provided for our customers.

T. I Reward Audio with the highest lever and most luxury raw material in the world, and offer to clients with the normal Chinese price.

1. Pure Iron System, it's the main part of the speaker driver units, such as pure iron, titanium, using electrical pure iron, high permeability, is the industry's most extravagant speaker material, compared to the speaker than ordinary iron sheet used 80 times to 100 times, particularly low temperature, characterized by a continuous sound particularly good, there is no magnetic circuit eddy current status, linear supple, not in haste.

2. Conical Wood horn, wood horn made from a more high-quality Russian birch plywood in high temperature and pressure, and unit-specific parameters of our own research and development agreement, wooden horn production cost is 5 times that of conventional plastic horn, professional PA system HI FI level production, is characterized by not with vibration woofer cavity interference sound particularly clear, detailed, this wooden horn sound reduction is particularly high.

3. Speaker research and production, our company has independent R & D capability of the speaker, from raw material procurement until the operating instructions issued to the final speaker line QA QC made by our technical team tracking execution. With the development and production of world-class speaker level.

For example, we strictly control the voice coil wire purity level, especially in the voice coil made of glue when we certified by the EU more than 220 degrees Celsius, 100 hours of power test, can provide relevant information parameters. Our usual cone of high- quality British UKN cone, he can better restore and release sound. We use a magnet Y35 quality international standards. T Washer We use top electrical iron, 900 degrees C after 8 hours-temperature annealing processing, so that the carbon content close to zero. Our Speaker Box frame belongs to our specially treated surface temperature electrostatic spray, and balanced treatment, such as selvedge position plucked location, location washer, we use CNC lathe finishing to ensure that the speaker is not at work There is an equilibrium problem. We open with a mold clamping, so that the speaker does not work exist selvage shedding problem.

We focus on new audio technology, fashion appearance, market flexible structure research. Our PA products in pursuit of high technology, fashion, plasticity characteristics.

Over 20 years of technical experience of our sound engineers are the foremost guarantee to all of our operation. Our electro-acoustic professionals and staffs are working for the company dedicatedly and energetically. Insistent training with serious, systematic and sophisticated QA concept to our staffs had built up solid foundation to our quality as well as to our success in the industry.

T. I Reward audio products ideal for rental market, installation market for events, multimedia, musicals, concert halls, theatres, church and other application …We never stop the music. We can easily meet all requirements for clients in quality, price and box design. Browse & our products & contact us for professional help and advice .