Technical parameter:
1. Raw material: Recycled paper
2. Output paper style: Fluting paper, liner paper;
3. Output paper weight: 90-300G/M2;
4. Net paper width: 1600mm;
5. Capacity: 20T/D;
6. Width of cylinder mould: 1950 mm;
7. Working speed: 20-60m/min
8. Design speed: 20-200m/min
9. Rail gauge: 2400 mm;
10. Drive way: AC inverter speed, section drive;
11. Model design: Cast-iron square box type machine frame; Inner press

II. Structure and characteristic of main part:
1. Cylinder section: Φ 1500mm× 1950mm stainless steel cylinder mould 3 sets, Φ 400mm× 1950mm couch roll 4 sets, reverse roll 1set, coated by rubber, rubber shore hardness 38oC± 2.
2. Press section: Φ 650mm× 1950mm× 2400mm natural marble roll 2 sets, Φ 600mm× 1950mm× 2400mm rubber roll 2 sets, coated by rubber, rubber shore hardness 90oC± 2. Penumatic device.
3. Dryer section: Φ 1500mm× 1950mm× 2400mm alloy dryer can 6 sets
4. Drive way: Equipped with 500 reducer 2 sets and 400 reducer one set. AC frequency convertion speed, adjustable speed.
5. Calender section: Equipped with three-roll calender with Φ 400mm bottom roll, Φ 300mm top roll and Φ 250mm middle roll
6. Φ 900mm sweat cylinder winding machine
7. 1575 rewinding machine 1 set


NO.    Item    Qty(set)
1    1575mm  multi-dryer  can    multi-cylinder  mould  paper  making  machine  1575mm     1
2    exhaust  hood  of  dryer  can    1
3    axial-flow  ventilator    1
4    15  type  roots  vacuum  pump    1
5    Suction  box    3
6    Three-roll  calender     1
7    1575mm  winding  machine    1
8    1575mm  rewinding  machine    1
    9    Frequency  control  cabinet    1
  10    Working  table    One  group

  11    Diesel  boiler    1
  12    Air  pump    1


Packaging
1. Fixed all the movable parts with plastic films.
2. Polystyrene foam plate wrapped around.
3. Wrapped with tighted plastic films several circles.
4. Fixed machine on the fumigated plywood pallet with iron wire.
5. Wrapped with wooden board around and nailed on.
Shipments;
1 sea transportation is from qingdao seaports or other ports.
2 the delivery time is decided by your needed machines or machine parts. But it also follows your needs.



Perfect service :
1.we can supply technical consulting and feasibility report according to client's current condition ;
2. We can make detail design of workshop and whole factory ;
3.we supply complete installation and test machine ;
4.we train client's engineer and worker for free ;
5.we supply spare part with best price ;