1.The coil specification:468mm,474mm,479mm,178mm,485mm

2.Output speed:12-15m/min(not including punch,cutting time)

3. Thickness of color steel sheet:2-4mm,Max can be 5mm

Z: 80x300mmx19mmx2mm

4.Material: galvanised steel Z275, Meet GBT/12755-91

5.Main motor power:30Kw

6. Hydraulic oil pump motor:7.5Kw,the pressure of hydraulic:20Mpa

7.Main roller stations:17steps(1 station 7 leveling rollers)

8. Roller material:Gcr15,quench

9.Main shaft material:45#advanced steel, quenching and tempering, Diameter:￠100

10.Tolerance:3m±1.5mm

11.Material of cutting: Cr12Mov,quench HRC 58-62℃

12.Frequency inverter: Mitsubish

13.Computer controlling system, PLC controlling length, encoder is OMRON brand

Transmission type:universal joint,gear box drive(as the picture)

14.Dimension (L*W*H):about 10m*1.5m*1.2m

15.Voltage: 220V,60Hz, 3 phase

16.Machine frame:guide pillar style

17.Forming machine guide feeding style: side hand wheel

18.punching device:3sets with three moulds

19.About the Z machine,we will make another 10 sets of rollers for you to change the C to Z, from the 6th station rollers,the rest 10 rollers need to be changed.we will add a series of edge rollers,we will remove the main shaft to change the sizes, we will supply you assembly drawing when you change the sizes.