Features:
 
Tt is suitable for straightening all kinds of high precision metal material.
This machine is the powerful new equipment which is used for high speed press work.And it can advavce pressing product's quality and quantity.
Fine electric parts can not be finished with high accuracy unless straightened coil materials may achieve.So Roll material need to be straightened,and the stress be moderately removed.
After being straightened,materials can be curled upward or downward or flat easily.
As bearings of work-rolls are,of a oiling,lubricating free type,there will be no trouble from the adherence of oil or dirt.
The drive unit is controlled by an inverters(cycle control) to feed smoothly at a speed synchronized with the press.
Two sections type straightening device,it is no need to adjust straighten function when rolled materi al is under straightening process(from start to end).To ensure the material at same flatness completely.
We Accept Special Purposed Machine Orders.
Adopt transducer timing,which is can running placidity.
 

JM18 PRECISION STRAIGHTENER
Models	JM18-100	JM18-200	JM18-300
Material Width	100 mm	200 mm	300 mm
Material Thickness	0.1-0.5 mm	0.1-0.5 mm	0.1-0.5 mm
Correction Axis	12 * 23 branches (under 11 on 10)	12 * 23 branches (under 11 on 10)	12 * 23 branches (under 11 on 10)
Straightening Method	4-point micro-adjustment
Power	AC three-phase voltage 220/380V
Straightening Speed	15m/min	15m/min	15m/min

 

JM20 PRECISION STRAIGHTENER
Models	JM20-100	JM20-200	JM20-300	JM20-400
Material Width	100 mm	200 mm	300 mm	400 mm
Material Thickness	0.15-0.6 mm	0.15-0.6 mm	0.15-0.6 mm	0.15-0.6 mm
Correction Axis	20 * 18branches (under 10 on 8)
Straightening Method	4-point micro-adjustment
Power	AC three-phase voltage 220/380V
Straightening Speed	15m/min	15m/min	15m/min	15m/min

JM32 PRECISION STRAIGHTENER
Models	JM32-100	JM32-200	JM32-300	JM32-400	JM32-500
Material Width	100 mm	200 mm	300 mm	400 mm	500 mm
Material Thickness	0.2-1.2 mm	0.2-1.2 mm	0.2-1.2 mm	0.2-1.2 mm	0.2-1.2 mm
Correction Axis	32 * 19branches (under 10 on 9)
Straightening Method	4-point micro-adjustment
Power	AC three-phase voltage 220/380V
Straightening Speed	15m/min	15m/min	15m/min	15m/min	15m/min

*Right of modification reserved.
*All specifications,dimensions and design characteristics shown in this page are subject to rechange without notice.