YK-IX glass frosting powder YK-IX glass frosting powder takes hydrochloric acid as its media in the production.It is fit for the etching production of flat glass, glass bricks,glaswares, crafts and other glass products. The frosted glass can be widely used as the table-top glass, glass partitions, silding door in the office and home decoration field.

[Usage] Add 5 kg HCL(36%)into 10 kg of glass frosting powder, stir the mixture fully and leave it still for 48 hours, then fully churn up the mixture then it can be put into the production.

[The process of technology in production] The clean glass→submerge it into the solution for 1-3 minutes, then take out→wash it with clean water→dry it.

[Attention line] 1. The frosting solution must be made up in plastic or preservative metal containers. 2. Wear rubber gloves to prevent burning skin, but if it happens, wash the wound immediately with clean water. 3. Be sure the surface of the glasswork is clean without oil, wax and gluey impurities. 4. The quantity of acid added when make the frosting solution depends on the frosted glass effects the clients required. 5. The solution must be fully stirred when it is put into the production, cover when store up. 6. In the production, when the solution has etched certain a number of glass products, add some new glass frosting solution into it to make sure the etching effects. 7. When discharge the waste solution, put some quicklime to neutralize the pollution.                         [Storage] The glass frosting powder should be stored up in the dry and ventilated place to avoid moisture.