cement concrete pipe making machine concrete pipe production line

The centrifugal concrete pipe mold is the essential mold to make the prestressed reinforcd conrete pipe with centrifugal molding. The structure of the mold is reasonable; the manufacturing technology is advanced; installationg and dismounting is very easy; enough strength and rigidity make it safe and reliable.

  Technical Indexs of Concrete Pipe Mould

Mold Diameter(mm)	Cylinder Thickness	Hooped, Longitudinal Reinforcement
300~600	6mm	8mm×60mm
800~1000	8mm	10mm×80mm
1200~1500	10mm	12mm×120mm
1500~2000	10mm	14mm×150mm

 

2 concrete pipe making machine

according to the difference of production technology, pipe making machine fall into three type: centrifugal type ,suspension roller type, vertical extrusion pipe machine.

 

Product Introduction of Centrifugal type Concrete Pipe Machine

The machine takes sands, stones and cement as raw materials to produce many kinds of reinforced concrete drainage pipe with the length of 1000-4000mm, internal diameter of 200-4000mm with the mouth shapes of flat, tongue and groove and socket and spigot. All mechanical indexes have meet the national standards. They have been used widely in deep well, municipal drainage, expressway and other water supply and sewerage works with higher level required. The production efficiency can reach 4-5 piece/hour.

 Working Principle of Suspension Roller type Concrete pipe making Machine

 

This machine uses the Roller to support the concrete pipe mould, and produce the roller force to concrete in the mould. When the roller rotate at a high speed, the concrete in the mould will spread in the inner wall of the pipe mould and form a cement pipe with the centrifugal force, and when the mould with the inner concrete pass on the roller, the concrete between the mould and the roller will be compacted solid to form a pipe.

 

Character of Suspension Roller type Concrete pipe making Machine

 

1 Short production Cycle: because of the good effect of the roller to compact the concrete, every pipe just need 3-5 minutes with high speed roller rotation.

 

2 This pipe machine uses the dry cast material, there will no waste cement mud, then it won't pollute the environment.

 

3 During the production, the noise is low, it is about 80-90 DB.

 

4 The concrete pipes are with high pressure load and with high production efficiency.